User's Manual

1. Connect the camera to the adapter (DC 8V 300mA). Turn on the camera
by sliding the power switch to ON position. The power indicator lights up.
Notes:
This camera can also work on dry battery , please load three AAA batteries to
the battery compartment at the bottom of camera with their polarities matched,
and then slide the power switch to ON position, the power indicator lights up.
ACCESS YOUR CAMERA VIA PC
The DC adapter will work instead of batteries after it is plugged. If the camera is
left unused for a long period of time, please unplug the adapter and remove the
batteries.
2. Connect the antenna to the receiver.
14
Access Your Camera