User's Manual

Table Of Contents

Receiver Remote Control Function

The receiver can remote control the power and direction of the camera.

The operation is as below.

Remotely control the camera's power

Press the CAM. ON/OFF button on the receiver to power on the camera;

press the button again to power off.

Note:

If the channel indicator CH1 on the receiver lights up, the camera at channel 1

can be remote controlled.

Remotely control the camera's direction

1. Press the AUTO button on the receiver to activate the camera's auto

horizontal rotation function. Press again to disable the function.

2. Press the / button on the receiver to rotate the camera at

horizontal direction manually. The max. angle is 180 degree.

3. Press the / button on the receiver to rotate the camera

at vertical direction manually. The max. angle is 60 degree.