English User's Manual Car Back View Monitor Night Vision & Weather-proof Model:011CF Please read this manual thoroughly before any attempt to install and operate this product and retain it for your future reference.
TABLE OF CONTENTS INTRODUCTION Notice Approval Information (FCC/CE) PRODUCT Features Package Contents Feature Locations 1~3 1 2~3 4~5 4 4 5 INSTALLATION & USAGE 6~9 LCD Installation Camera Installation Find Reversing Power Maintenace 6~7 7 8~9 9 SPECIFICATIONS 10 TROUBLESHOOTING 11 EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
INTRODUCTION Thank you for purchasing our car back view monitor. This product works at ISM-2.4GHz frequency band, which could be legally used worldwide without permission. We feel confident that you will be pleased with the quality and features of this product. The product is made of alloyed shell and special weather-proof enclosure that protect it against power and water sprays. It passed the IP67 testing. The product offers a new solution and experience for drivers.
CE This product complies with standards including Low Voltage Device Directive 2006/95/EC; EMC Directive 2004/108/EC and R&TTE Directive 1999/5/EC. It passed the subject tests by the authority concerned and is authorized to bear CE mark.
PRODUCT Features » Special optical lens substituting the original rear-view mirror » 120° view angle for wide eyeshot » Water resistance design for outdoor usage » Easy installation, suitable for cars, small and medium buses » Automatically start up the rear view images while reversing Package Contents This package comes with the following items. Please check whether they are all included in the packaging box, if one or some is missing, contact the retailer for replacement.
Feature Locations Camera Installing Bracket Installing Hole Lens IR Lights LCD Monitor Contrastness Brightness Power ON/OFF Reverse Image Channel Button Channel Indicator 5
INSTALLATION We strongly recommend you ask qualified technician or maintenance engineer to install this device. Improper installation of this monitor may cause battery leakage or short circuit. Please follow steps below to install the product. LCD Monitor Installation Camera Installation LCD Installation 1. Install the LCD monitor to the bracket then stick it on the even place in the front of the car tightly. And adjust the angle for perfect viewing effect.
2. Connect the power to the +12V correctly. Camera Installation 1. Remove the screws from the license bracket, locate the camera on the license bracket then screw them tightly. 2. Connect the black pin of the camera to the black pin of the power cable. 3. Use the detector to detect the wire near reversing lights on the rear car body to find reversing power then connect the wire correctly.
Find Reversing Power How to use the detector to find the power from the reverse power? 1. Tweak the key to the right side of the cigarette lighter, step on the reverse gear, the power from the reverse light will be on at once. 2. Clip the pincers to the metal of the car body. 3. Use the red pen to find the power from the wire until the LED light is on.
4. Red wire connects to anode +12V; blue wire connects to reversing power 12V; black wire connects ground. Reversing power Anode +12V 3P Blue wire Red wire Black wire Ground Maintenance ◆ Do not shake or strike the product; ◆ Do not disassemble or repair the camera; doing so may cause damages to the product. ◆ The product can connect to the VCD/DVD and play program, however, please don’t watch the program while driving.
SPECIFICATIONS Transmission Frequency ISM 2,400~2,483MHz 10mW/CE; 2mW/FCC 20m Without Block (min) FM Transmission Power Transmission Distance System Modulation Mode -10℃~+50℃/+14℉~+122℉ Operating Temperature -20℃~+60℃/-4℉~+140℉ Storage Temperature Operating Humidity ≦85% Operating Condition Car, Bus and Truck CMOS 628*582 (PAL)/510*492(NTSC) 380TV Lines Imaging Sensor Type Picture Total Pixels Horizontal Resolution Camera View Angle 130° Minimum Illumination 0Lux/F1.2(IR ON) Min.
TROUBLESHOOTING When you experience the operation problems, please check and try the following yourself before claiming that it is the defective product or consulting the experienced technician. Abnormal Phenomena Possible Reasons/Solutions Check if the fuse is connected well. Monitor does not work Check whether the camera/LCD monitor connected to power supply and powered on. Check if the polarity of the battery is fit properly. Mismatching the TV system of PAL or NTSC.