Remote Dog Training System User manual Model:AFU-WHO-0002 Thank you for purchasing our product. In order to use this product safely, please read the manual before using it. Please keep it properly after reading for further checking and reference. Tips: If the function of the product described in the instructions has been upgraded, no further notice will be given.
1.Accessories list ⚫ ⚫ ⚫ ⚫ ⚫ 1 x remote control unit 1 x collar tie 1 x pet collar unit 1 x USB charging cable Three pairs of metal contacts of collar unit (long and short, one pair has been installed on the collar unit) In the multi collar set, there are multiple collar control units. 2.
.Remote control LCD display interface 3
LCD display icon definition Position Display Name Description Indicates the signal strength of the collar unit,the currently selected channel is hidden when the collar is not paired, when it’s paired but off-line it will flash. When locked, it will be displayed and hidden after unlocking. When it’s unlocked,press the [vibration] or [static] button, the operation will be prohibited, and the lock icon will flash.
6 Set level 7 Sound indication 8 Remote control power 9 Channel number 10 Vibration indication 5 Indicates the set sound, vibration, static action intensity, and the set number will flash when the output intensity is selected The sound symbol indicates that the vibration and static action will be accompanied by sound, and no display means that there is no sound accompanying with vibration and static electricity action. When the [sound] button is pressed alone, it will flash.
Electrostatic indication 11 When the [electrostatic] button and the [unlock] button are pressed at the same time, it will flash LCD display and back light definition Color Definition description The back light color of the White screen is white after the Power on remote control is turned on When the [vibration] button and [unlock] Yellow button are pr Vibration mode essed at the same time, the screen back light color is yellow When the [electrostatic] button and the [unlock] Red Electrostatic
No back The LCD displays, but the Stand by back light is off. light No screen LCD doesn’t display Power off when it’s power off display 4.Collar unit views 1 Electrostatic generation metal contact ○ 2 USB type-C charging interface and silicone cover ○ 3 Working and charging LED indicator light ○ 4 Switch on / off button ○ LED status light Collar status LED indicator light displays Power off LED light off Power on Three LED lights indicate the battery power.
Pair Charging Low power arcade is on. When the switch button is pressed or when the remote control indication is received, it will be on Three LED lights cycles flash alternately The flashing indicates the charging progress of the battery, and all three LED lights are on when the battery is fully charged Three LED lights flash quickly at the same time, and then turn off, and the device automatically turns off at the same time 5.
the pet skin. In order to avoid possible skin damage, the device is designed to take up to 15 seconds each time when a button is pressed. Do not allow the collar to be worn by the pet for more than 12 hours. Check the neck area after usage, if rashes or pain occurs, stop using it until the skin is completely healed. If the condition persists, consult your veterinarian. 6.Safety tips Warning: Do not use on aggressive dogs.
7.Charge the device Use the attached USB in the accessory to connect one end of type-C to the remote control or neck loop unit, and the other end to the USB charger, the device can be charged. When the device is charging, all training functions will be automatically disabled,and there will be no action when the button is pressed. 8.Install collar tie 1.Turn off the power supply of the collar unit before connecting the neck tie 2.Put the collar unit device downward and the metal contact upward 3.
9.Wearing the collar unit on a dog 1. Make sure the collar unit is powered off. 2. Let your dog stand in a balanced position on a flat ground. 3. Put the collar strap around the dog's neck, put the pet collar under its neck, and the indicator light is facing you. 4. Put the end of the webbing through the buckle. 5. Tighten the end of the collar until the desired tightness is achieved and pass the push rod through the nearest webbing hole. 6.
metal contacts anticlockwise direction clockwise direction 11.Device on / off Remote control unit on / off Power on: press the [unlock ] button to start the machine. Standby: when no button is pressed, the remote control unit will go into dormant mode after 15 seconds. When in dormant mode, the screen will be displayed and the back light will be off. Wake up: when the remote control unit in standby mode, any button can wake it up.
3. Turn on the remote control unit and select the channel needed. 4. Press the [sound ] button of the remote control .. 5. When the pairing is successful, the collar LED light will be off, and the [signal icon ]of the remote control will also display the signal strength. If the pairing is not successful, the remote control unit will automatically exit the pairing after 60 seconds. 13.Channel selection 1. The remote control unit can select the channel when it’s on or standby. 2.
16.Vibration function 1. The remote control can send a signal to trigger the collar unit to generate vibration when it’s on or standby. 2. Press the [vibration ] and [unlock ] buttons of the remote control at the same time to send signals. 3. Press and hold the button continuously to send out the signal, and it will stop automatically after 15 seconds. 4. By default, the vibration function will produce sound at the same time,can also choose to turn off the sound. 17.Electrostatic function 1.
the stress response of pet, and can also be used as a reference for auxiliary adjustment of intensity selection. 20.Wear detection The wear detection function can detect whether the metal electrode of the collar unit is in effective contact with the dog's skin. If it is not properly worn, the [wear indication ] icon on the LCD screen will flash. If the contact is good, the icon will be on.
transmission and the actual remote control distance of the remote controller. .................................................................................................................................. Q: how do I know if the device needs charging? A: the screen of the remote control can display the power of the remote control and the collar unit. When the power is only half or less than half, it will display 1 grid (insufficient power).
dog will understand what you like and what you don't like it to do. .................................................................................................................................. Q: when the device is put on the dog's neck and the remote control button is used to send instructions, the dog does not respond. What is the problem? A: Check if the remote control unit and collar unit have power. Check if he remote control unit security lock is unlocked .
FCC WARNING Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.