User Manual

4
Save: save the edited number to the phone book.
Message: edit and send a message to the edited number.
Hard pause: hard pause the edited number
Time pause: set the pause time to the edit number..
3.2.2 Call a number from Recent Calls
In the idle, press Dial key to enter Recent calls interface. In the list interface,
you can choose someone and press Dial key to dial it. The detail operation is in
[Menu/Call logs].
3.2.3 Speed Dialing
In the idle, you can press and hold 1~9 to speed dialing numbers. If you do not
set speed number before, the phone will prompt “Empty address”. The detail is
in [Menu/Contacts/Speed Dial].
3.2.4 Tri-party Conversation
During the conversation, input the third number from the phone book, or input
the numbers by the keypad directly. And then create the Tri-party Conversation,
press Dial key to begin it after the third one answer the call.

Notes:
Before you use the tri-party conversation, please confirm that the local network
support this function and the UIM card opened this function too.
3.3 Answer a Call
When you have an incoming call, your phone rings or vibrates depending on the
parameters you choose. However, if the number has been stored in the phone
book, the caller’s name will be displayed.
You can press Answer key to answer it, or you can answer it by other ways that
you can set the answer mode in [Menu/Call Manager/Call settings/Answer
Mode]; otherwise, you can press End key to reject it.

Main Menu
4.1 Contacts
Allow you to manage your phone book and keep records of your contacts in
Phone, UIM Card and SIM Card.
4.1.1 Add New
You can store multiple contact details under a name: Group ID, Mobile Number,
Office Number, Home Number, Other Number, set particular ring tone for
incoming calls, E-mail address, Memo.
1. Enter a Name for the phone number.
2. Press[ Down ], select a desired group using [ Left ]/[ Right ] .
3. Press [ Down ], input Mobile /Office/Home /Other numbers as required.
4. To assign Speed Dials, select the phone number, then press [ Left Soft ] key
< Options> - < Assign >. Using number key, input speed dial or select a
desired speed dial with [ Navigation ] key and then press [ OK ].
5. After selecting ringing by pressing [ Down ] , press [ Left Soft ] key <
Options> - < Set > select a desired ringing and press [ OK ].
6. After selecting E-mail by pressing [ Down ] , inputting e-mail address.
There are some predefined domains, you may select them by [ Left Soft ] key
< Options> - < WWW>.
7. After selecting Memo using [ Down ],input the memo.
8. Press [ OK ], then set default number you want.