User's Manual

External CD Player
or Other Signal Resource
Please connect audio signal output of CD or other auxiliary signal resource with
AUX IN port of the rear part of radio on the left (figure 1) ○
17
through RCA
wire. When using, please press the key switch at the front panel of the radio
(figure 2)○
15
, and then turn the function switch to FM/AUX position (figure 2)○
12
.
After turning on the power switch and adjust to an appropriate position, a
beautiful sound effect unique to CD+ Tube Amplifier is available in a moment. If
using external loudspeaker, the sound effect would be different from the radio
one.
When choosing AUX, please remember to turn the AUX/AFC/BT on the bottom
left to a correct position. The knob should be in FM/AUX under AUX or
reception state。
Bluetooth Function Instructions
This radio is available for Bluetooth
player of telephone, Pad, and PC.
When using Bluetooth function,
please remember to turn the key
switch to “AUX” position and turn
the knob on the bottom left to BT
position. When not using Bluetooth,
please turn back to “FM/AUX”
position.
Attention： When using Bluetooth
function, it is necessary to pull out
the signal wire connecting AUX IN.
When connecting the signal
source, please notice the
correspondence of the L and
R track between the audio
source and radio AUX.