User's Manual

6.9.4 Backup and Reset

Allows you to reset the camera to factory defaults, backup the configuration in case of accidental reset and

restore settings from a backup.

[Reset] Click Reset to initialize the camera to default factory settings. All users and settings will be lost,

requiring you to reconfigure the camera.

[Backup] Click Backup to back-up the current configuration of the camera for future reference. Once you

have your camera setup as you require, this is recommended.

To restore a backup file:

[Browse...] Click Browse... to search for a backup configuration you wish to upload to the camera, then click

Restore.

Note: Do not turn off the power during the Restore function since this might corrupt the camera’s firmware