Quick Start Guide

Page 4
Getting Started - Bluetooth Connection - Step 2
With your iPhone, iPad/Tablet, Smartphone
- Go to Settings > Bluetooth, check Bluetooth is on
- Select 'CA-2890 BT Speaker Bar' when it appears under DEVICES
- Your device will connect in a few seconds
- The Source Light will turn solid blue
- The Cyber Acoustics Speaker is ready to use
Note: Your Smartphone or Tablet instructions may vary
With your Apple Mac or Windows 10 Laptop/Computer
- Use the USB Connection when using with a Windows 10 Laptop/Computer or Apple Mac.
Bluetooth does not function as well as USB on Windows or Mac computers.
Getting Started - Bluetooth Connection - Step 1
Before you start, insert the USB Type A end of the Speaker Cable into the USB Type A port on your
computer. (See Page 2 - USB Connection)
- Press the Multi-Function Button two times (see controls on Page 6) to switch between USB mode
and Bluetooth mode.
- When changed to Bluetooth mode, the Speaker Bar will be in pairing mode and the Source Light
will be flashing blue or if already connected to a Smartphone or Table the Source Light will be
solid blue.
Source Light Flashing Blue
- The Cyber Acoustics Speaker Bar is ready to pair and connect. (See page 4 to connect your
Smartphone or Tablet)
Source Light Solid Blue
- Your device has connected to the Cyber Acoustics Speaker Bar and is ready to use.
- The Cyber Acoustics Speaker Bar allows the last device it was connected with to automatically
reconnect with the speaker each time the speaker is turned on and that device is within range.*
- When connected to a Smartphone, the Speaker Bar will auto switch to Bluetooth mode from USB
mode when there is an incoming call on the connected Smartphone.
The Cyber Acoustics Speaker Bar can be connected to one device at a time.
- To pair and connect to a different device, you need to first disconnect the currently paired device.
- To disconnect the current device, press and hold down the Multi-Function Button for 5 seconds.
- The Source Light will begin flashing blue and the Cyber Acoustics Speaker Bar is ready for the next
device to pair and connect.
* Your device needs to be within 10 unobstructed meters of the Cyber Acoustics Speaker Bar to pair and
connect. If there is an issue when connecting please move your device closer to the speaker, then pair
and connect.
Page 3
Quick Start Guide
CA P/N: CA-2890BT Rev. A00
2022-05
Use at Home, Office or Traveling
www.CyberAcoustics.com
Cyber Acoustics
Speaker Bar
(CA-2890BT)
In the Package
Quick Start Guide
USB Type A to C Adapter
Note: The USB Type A to C
Adapter is packed along with
the QSG inside the box.
Quick Start Guide
CA P/N: CA-2890BT Rev. A00
2022-05
Use at Home, Office or Traveling
www.CyberAcoustics.com
Cyber Acoustics
Speaker Bar
(CA-2890BT)
Cyber Acoustics
Speaker Bar (CA-2890BT)
Table of Contents
Using the Speaker Bar
Getting Started - USB Connection
Controls
Technical Speci¿cations
Frequently Asked Questions
Customer Support
Safety and Precautions
Pages
1
2
6
7
8,9,10
11
12
13,14
Compliance Information
Lights
5
Getting Started - Bluetooth Connection
3,4
Using the Speaker Bar
Best for Use In
Home - Office - Traveling
Page 1
/ USB
Page 2
Getting Started - USB Connection
The Cyber Acoustics Speaker Bar can be used with a Bluetooth connection to
your Smartphone or Tablet and a USB connection to your Windows 10 PC or Mac.
USB connection - Using with a PC or Mac
- Insert the USB Type A end of the Speaker Cable into the USB
Type A port on your computer. You can also use the provided
USB A to C adapter to connect the Speaker Bar to an available
USB Type C port on your computer.
- The Speaker Bar will power on and connect to your PC in USB mode.
- Source Light will be lit solid Green.
The Cyber Acoustics Speaker Bar features full plug and play support for Windows 10, OSX /
MacOS and Chromebooks. After plugging the Speaker Bar into the computer, you may use for
playing music, videos or as a speakerphone with applications such as Zoom, Teams, Skype, etc.
If the computer does not automatically recognize the Speaker Bar when it is plugged into the USB
Type A port, try plugging the USB Cable into a different USB Type A port.
If this does not work, then restart the computer. This will cause the Speaker Bar to be
recognized in most instances.
Important: If the Speaker Bar is also connected by Bluetooth to a Smartphone, the Speaker Bar
will auto switch from USB mode to Bluetooth mode when there is an incoming call on the
connected Smartphone. (See page 4 to connect your Smartphone). To change back to USB mode
after the call is complete, press the Multi-Function button twice (see controls on page 6).
Page 5
Lights
Source Light
USB mode - Solid Green
Bluetooth mode
- Flashing Blue - Ready to pair with Smartphone or Tablet
- Solid Blue - Connected to Smartphone or Tablet
Call / Microphone Mute Indicator
Flashing Red – Incoming call from Smartphone
Solid Purple – Call in progress on Smartphone
Solid Red – Microphone muted (call functions not available as noted above)
Red Light Off – Microphone unmuted (call functions active as noted above)
Page 6
Controls
Multi-Function Button
Press twice to switch between Bluetooth and / USB mode
Press & hold for 5 seconds to disconnect the connected Smartphone or Tablet
Press once to Answer/End a call or Play/Pause music
- Music will pause automatically when there is an incoming call from a Smartphone
Press twice to reject an incoming call
Press once to decrease the volume
Press & hold to decrease the volume continuously until minimum level
(A light beep sound will be heard when the volume level reaches minimum)
Press once to increase the volume
Press & hold to increase the volume continuously until maximum level
(A light beep sound will be heard when the volume level reaches maximum)
When talking, press once to mute the mic input; Press again to unmute.
Page 7
Technical SpeciȴFDWions
Frequency response
Product working at ambient temperature for 0~35°C
Windows 10, Mac OS X 10.4.11 or higher
ͻ^ƉĞĂŬĞƌϴϬͲϭϲϬϬϬ,nj
ͻDŝĐƌŽƉŚŽŶĞϭϬϬͲϭϲϬϬϬ,nj
ͻϱsϬϱͲWŽǁĞƌ^ŽƵƌĐĞ
ͻϮtǁŚĞŶƉůĂLJŝŶŐŵƵƐŝĐ;ϭtdžϮͿ
WŽǁĞƌ
Impedance
ͻ^ƉĞĂŬĞƌϰŽŚŵƐ
ͻDŝĐƌŽƉŚŽŶĞϮϮŬŽŚŵƐ
Recommended System Requirements
^ƉĞĐŝĮĐĂƟŽŶƐ
^ƵƉƉŽƌƚĞĚŽƉĞƌĂƟŶŐƐLJƐƚĞŵ
KƉĞƌĂƟŶŐƚĞŵƉĞƌĂƚƵƌĞ
Page 8
ͻRe-insert the USB cable of the speaker to your PC and switch it to BT pairing mode.
ͻCheck your Bluetooth source device and be sure you have found tŚĞƐĞĐƟŽŶƚŚĂƚĂůůŽǁƐLJŽƵ
to discover new Bluetooth products. If you see the speaker on the list, but cannot connect,
you may need to try and synch again. To start fresh, with your Bluetooth device, select
“Forget this device,” to remove the “CA-2890 BT Speaker Bar” from the list.
You may need to turn ŽīƚŚĞůƵĞƚŽŽƚŚĨƵŶĐƟŽŶŽŶLJŽƵƌĚĞǀŝĐĞƚŽĨƵůůLJĐůĞĂƌLJŽƵƌůŝƐƚ
ͻZĞƚƵƌŶƚŽLJŽƵƌƐŽƵƌĐĞĚĞǀŝĐĞĂŶĚƌĞͲĞŶĂďůĞƚŚĞůƵĞƚŽŽƚŚĨƵŶĐƟŽŶ>ŽŽŬĨŽƌƚŚĞ
“CA-2890 BT Speaker Bar” to show back up on the list.
ͻSelect the speaker on your screen, and pair it.
Frequently Asked Questions
ͻ/ĨƚŚĞƐƉĞĂŬĞƌĚŽĞƐŶŽƚĂƵƚŽŵĂƟĐĂůůLJƌĞĐŽŶŶĞĐƚǁŝƚŚLJŽƵƌůƵĞƚŽŽƚŚĚĞǀŝĐĞLJŽƵŵĂLJŶĞĞĚ
ƚŽŐŽŝŶƚŽLJŽƵƌĚĞǀŝĐĞƐůƵĞƚŽŽƚŚƐĞƫŶŐƐĂŶĚƌĞͲƐĞůĞĐƚƐƉĞĂŬĞƌƚŽƌĞĐŽŶŶĞĐƚ
ͻBe sure to check your room environment. Today’s Bluetooth technology has a designed
limit of approximately 10 unobstructed meters, line of sight. Your best results will be when
your source device and Speaker Bar are in the same room. Extremely large rooms, or
ƌŽŽŵƐǁŝƚŚůŽƚƐŽĨǁŝƌĞůĞƐƐĞůĞĐƚƌŽŶŝĐƐǁŝͲĮƌŽƵƚĞƌƐƌĂĚŝŽƚƌĂŶƐŵŝƩĞƌƐĞƚĐŵĂLJĂīĞĐƚLJŽƵƌ
ability to pair and connect.
ͻŚĞĐŬĨŽƌŽďƐƚƌƵĐƟŽŶƐǁĂůůƐŽƌŽƚŚĞƌŽďũĞĐƚƐƚŚĂƚŵŝŐŚƚŝŵƉĞĚĞƚŚĞůƵĞƚŽŽƚŚƐŝŐŶĂů
ͻTry returning to the source device to a closer proximity with your speakers.
ůƵĞƚŽŽƚŚĐŽŶŶĞĐƟŽŶ
ĂŶƚĐŽŶŶĞĐƚĨŽƌƚŚĞĮƌƐƚƟŵĞ
&ƌĞƋƵĞŶƚůLJƐŬĞĚYƵĞƐƟŽŶƐ WŽƐƐŝďůĞ^ŽůƵƟŽŶƐ
ůƵĞƚŽŽƚŚĐŽŶŶĞĐƟŽŶ
Can’t connect when returning
Page 9
h^ĐŽŶŶĞĐƟŽŶ
Mac:
^ƉĞĂŬĞƌĂƌĚŽĞƐŶŽƚƐĞƚƵƉĂƵƚŽŵĂƟĐĂůůLJ
ͻKƉĞŶƚŚĞ&ŝŶĚĞƌƉƉůŝĐĂƟŽŶƚŚĞŶƐĞůĞĐƚƉƉůŝĐĂƟŽŶƐ
ͻKƉĞŶ^LJƐƚĞŵWƌĞĨĞƌĞŶĐĞƐƚŚĞŶĐůŝĐŬ^ŽƵŶĚ
ͻ^ĞůĞĐƚƚŚĞ/ŶƉƵƚƚĂďƚŚĞŶƐĞůĞĐƚͲϮϴϵϬd^ƉĞĂŬĞƌĂƌDĂŬĞƐƵƌĞƚŚĂƚƚŚĞŵƵƚĞ
ďƵƩŽŶŝƐŶƚƐĞůĞĐƚĞĚ
ͻ^ĞůĞĐƚƚŚĞKƵƚƉƵƚƚĂďƚŚĞŶƐĞůĞĐƚͲϮϴϵϬd^ƉĞĂŬĞƌĂƌDĂŬĞƐƵƌĞƚŚĂƚƚŚĞŵƵƚĞ
ďƵƩŽŶŝƐŶƚƐĞůĞĐƚĞĚ
ͻtŚĞŶĮŶŝƐŚĞĚĐůŽƐĞ^LJƐƚĞŵWƌĞĨĞƌĞŶĐĞƐ
Frequently Asked Questions
ͻ/ŶƚŚĞƐĞĂƌĐŚďŽdžŽŶƚŚĞƚĂƐŬďĂƌƚLJƉĞĐŽŶƚƌŽůƉĂŶĞůƚŚĞŶƐĞůĞĐƚŝƚĨƌŽŵƚŚĞƌĞƐƵůƚƐ
ͻ^ĞůĞĐƚ,ĂƌĚǁĂƌĞĂŶĚ^ŽƵŶĚĨƌŽŵƚŚĞŽŶƚƌŽůWĂŶĞůĂŶĚƚŚĞŶƐĞůĞĐƚ^ŽƵŶĚ
ͻKŶƚŚĞWůĂLJďĂĐŬƚĂďƌŝŐŚƚͲĐůŝĐŬͲϮϴϵϬd^ƉĞĂŬĞƌĂƌƐĞůĞĐƚ^ĞƚĂƐĞĨĂƵůƚĞǀŝĐĞ
ĂŶĚƚŚĞŶƐĞůĞĐƚK<
ͻsĞƌŝĨLJŐƌĞĞŶĐŝƌĐůĞǁŝƚŚĂĐŚĞĐŬŵĂƌŬŶĞdžƚƚŽͲϮϴϵϬd^ƉĞĂŬĞƌĂƌ
ͻKŶƚŚĞZĞĐŽƌĚŝŶŐƚĂďƌŝŐŚƚͲĐůŝĐŬͲϮϴϵϬd^ƉĞĂŬĞƌĂƌƐĞůĞĐƚ^ĞƚĂƐĞĨĂƵůƚĞǀŝĐĞ
ĂŶĚƚŚĞŶƐĞůĞĐƚK<
ͻsĞƌŝĨLJŐƌĞĞŶĐŝƌĐůĞǁŝƚŚĂĐŚĞĐŬŵĂƌŬŶĞdžƚƚŽͲϮϴϵϬd^ƉĞĂŬĞƌĂƌ
ͻ;KƉƟŽŶĂůͿdŽĂĚũƵƐƚƚŚĞƐƉĞĂŬĞƌǀŽůƵŵĞĐůŝĐŬWƌŽƉĞƌƟĞƐ
ͻtŚĞŶĮŶŝƐŚĞĚĐůŝĐŬƉƉůLJƚŚĞŶK<
h^ĐŽŶŶĞĐƟŽŶ
Windows 10:
^ƉĞĂŬĞƌĂƌĚŽĞƐŶŽƚƐĞƚƵƉĂƵƚŽŵĂƟĐĂůůLJ
&ƌĞƋƵĞŶƚůLJƐŬĞĚYƵĞƐƟŽŶƐ WŽƐƐŝďůĞ^ŽůƵƟŽŶƐ
Page 10
h^ĐŽŶŶĞĐƟŽŶ
Speaker Bar does not have sound /
Microphone is not working
Frequently Asked Questions
&ƌĞƋƵĞŶƚůLJƐŬĞĚYƵĞƐƟŽŶƐ WŽƐƐŝďůĞ^ŽůƵƟŽŶƐ
- Check the computer’s volume level.
ͲŚĞĐŬƉƌŽƉĞƌƐĞĂƟŶŐŽĨĐĂďůĞĐŽŶŶĞĐƟŽŶ
ͲsĞƌŝĨLJƚŚĞĂƉƉůŝĐĂƟŽŶƐĞƫŶŐƐLJŽƵĂƌĞƵƐŝŶŐ^ŽŵĞĂƉƉůŝĐĂƟŽŶƐŚĂǀĞ
separate volume level control.
- Check that the computer recognizes the Speaker Bar - showing it is
ĐŽŶŶĞĐƚĞĚĂŶĚƐĞůĞĐƚĞĚǁŝƚŚŝŶLJŽƵƌĐŽŵƉƵƚĞƌK^ƐĞƫŶŐƐ
;^ĞĞƚŚĞWĂŐĞĨŽƌtŝŶĚŽǁƐĂŶĚDĂĐƐĞƫŶŐŝŶƐƚƌƵĐƟŽŶƐͿ
ͲsĞƌŝĨLJƚŚĞŝŶƉƵƚŽƵƚƉƵƚůĞǀĞůƐǁŝƚŚŝŶƚŚĞƐŽƵŶĚĂƵĚŝŽƐĞƫŶŐƐŽĨLJŽƵƌ
ĐŽŵƉƵƚĞƌƐƐĞƫŶŐƐ
ͲhŶƉůƵŐƚŚĞ^ƉĞĂŬĞƌĂƌĨƌŽŵƚŚĞh^ƉŽƌƚŽĨƚŚĞĐŽŵƉƵƚĞƌĂŶĚƚŚĞŶ
ƌĞͲŝŶƐĞƌƚŝŶƚŽƚŚĞh^ƉŽƌƚŽĨƚŚĞĐŽŵƉƵƚĞƌ
ͲZĞƐƚĂƌƚLJŽƵƌĐŽŵƉƵƚĞƌĂŶĚƌĞͲǀĞƌŝĨLJƚŚĞĂďŽǀĞƐƚĞƉƐZĞƐƚĂƌƟŶŐŽŌĞŶŚĞůƉƐ
a computer connect to the speaker.
/ĨƵƐŝŶŐŽŽŵŽƌDŝĐƌŽƐŽŌdĞĂŵƐĨƵƌƚŚĞƌŝŶƐƚƌƵĐƟŽŶƐĨŽƌĂƵĚŝŽƐĞƫŶŐĐĂŶ
ďĞĨŽƵŶĚŽŶƚŚĞďĞůŽǁǁĞďƐŝƚĞƐ
ŚƩƉƐƐƵƉƉŽƌƚnjŽŽŵƵƐŚĐĞŶͲƵƐĂƌƟĐůĞƐϮϬϭϯϲϮϮϴϯͲdĞƐƟŶŐͲ
computer-or-device-audio
DŝĐƌŽƐŽŌdĞĂŵƐ
ŚƩƉƐƐƵƉƉŽƌƚŵŝĐƌŽƐŽŌĐŽŵĞŶͲƵƐŽĸĐĞŵĂŶĂŐĞͲLJŽƵƌͲĐĂůůͲƐĞƫŶŐƐͲŝŶͲ
ƚĞĂŵƐͲϰϱϲĐďϲϭϭͲϯϰϳϳͲϰϵϲĨͲďϯϭĂͲϲĂďϳϱϮĂϳϱϵϱĨ
Page 11
Customer Support
Contact us at:
www.cyberacoustics.com/support/contact
If you have a question about your Cyber Acoustics Speaker Bar, our
Customer Service Team wants to assist you.
Page 12
Safety and Precautions
- Read and follow all instructions – All operating and use instructions should be followed.
- Protect the Speaker Bar from being pinched, particularly at the connectors. Unplug during
lightning storms or when unused for long periods of time.
- Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampli¿ers) that produce heat.
- Do not make alterations to the Speaker Bar.
- Do not place near nakedÀame sources, such as lighted candles.
- Do not expose to excessive heat (e.g. from storage in direct sunlighW¿re or the like).
2022 Cyber Acoustics or its subsidiaries. All rights reserved. Cyber Acoustics and other trademarks
are trademarks of Cyber Acoustics or its subsidiaries. Other trademarks may be trademarks of their
respective owners.
Page 13
Unique Identifier: (CA-2890BT)
Responsible Party - Cyber Acoustics LLC
3109 NE 109th Ave., Vancouver, WA 98682
cyberacoustics.com
ŽŵƉůŝĂŶĐĞ/ŶĨŽƌŵĂƟŽŶ^ƚĂƚĞŵĞŶƚ
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
t3FPSJFOUPSSFMPDBUFUIFSFDFJWJOHBOUFOOB
t*ODSFBTFUIFTFQBSBUJPOCFUXFFOUIFFRVJQNFOUBOESFDFJWJOHEFWJDF
t$POOFDUUIFFRVJQNFOUJOUPBOPVUMFUPOEJòFSFOUDJSDVJUGSPNUIFSFDFJWJOHEFWJDF
t$POTVMUUIFEFBMFSPSBOFYQFSJFODFESBEJP57UFDIOJDJBOGPSIFMQ
t$IBOHFTPSNPEJöDBUJPOTOPUFYQSFTTMZBQQSPWFECZUIFQBSUZSFTQPOTJCMFGPSDPNQMJBODFDPVMEWPJE
the user’s authority to operate the equipment.
Page 14
RF exposure statement
This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102.
It should be installed and operated with a minimum distance of 20cm between the radiator and any
part of your body.
Cet équipement est conforme à l'exemption des limites d'évaluation habituelle de la section 2.5 de
la norme RSS-102. Il doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur
et toute partie de votre corps.
IC WARNING
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a minimum
distance of 20cm between the radiator and any part of your body.