Quick Start Guide

Page 2
Getting Started - Step 1
Preparing the CA Essential Bluetooth Headset to connect to your Bluetooth enabled device.
Before you start, please fully charge the CA Essential Bluetooth Headset. (See Page 6)
- Turn on the CA Essential Bluetooth Headset by pressing the Multi-Function button for
3 seconds.
LED Light alternately flashing Red and Blue
- The CA Essential Bluetooth Headset is ready to pair and connect
LED Light flashes Blue once every 10 seconds
- Your device has connected to the CA Essential Bluetooth Headset and is ready to use.
- The CA Essential Bluetooth Headset allows the last device it was connected with to automatically
reconnect with the headset each time the headset is turned on and that device is within range.*
The CA Essential Bluetooth Headset can be connected to one device at a time.
- To pair and connect to a different device, you need to first disconnect the currently paired
- To disconnect the current device, Press and hold the + and - buttons at the same time for more
than 1 second.
- The Light will begin flashing Red and Blue alternately and the CA Essential Bluetooth Headset
is ready for the next device to pair and connect.
* Your device needs to be within 10 unobstructed feet of the CA Essential Bluetooth Headset to
pair and connect. If there is an issue when connecting, please move your device closer to the
headset, then pair and connect. When the charge is too low indicated by the LED Light flashing
Red on the headset, your device will not be able to connect with the headset.
Multi-Function Button
LED Light