Ultra-Portable Bluetooth Speaker Quick Start Guide Designed and Engineered By TheOontZ.
Table of Contents In the Package Play Controls Lights and Connectors Charging the Battery Battery Features Turning On and Off Pair & Connect - Step 1 Pair & Connect - Step 2 --- From Your From Your iPhone, iPad, Smartphone, Tablet and Mobile Devices -- From Your Apple Mac or Windows Laptop/Computer -- From Your Amazon Echo Dot Playing From Non-Bluetooth Audio Source Devices Using the 3.
In the Package Quick Start Guide Micro USB Charging Cable 3.5mm Audio Cable The Note: The Micro USB Charging Cable and the 3.5mm Audio Cable are packed below the cardboard insert in the box. Slide out the cardboard insert to locate the cables.
Play Controls Play/Pause Bluetooth Button (Dual Function) Press and Release to Pause/Play Track Back Track Forward Press and Release to go to the beginning of the current track. Press and Release a second time to play previous track Press and Release to play next track Volume Down Volume Up Press to decrease volume Press to increase volume Power Button Note: - Make sure the volume level is set high on your audio source device.
Lights and Connectors Red Light when charging: - slowly flashing Red charging Built-in Mic for Speakerphone Blue Light when speaker is on: - flashing Blue speaker is in pairing mode - solid Blue speaker is connected - solid Red fully charged Rubber Flap pull gently from the top AUX IN Jack located under rubber flap Micro USB Charging Connector located under rubber flap Note: The rubber flap needs to be closed to keep the speaker water resistant Page 3
Charging the Battery The rechargeable battery comes with a partial charge and the speaker is ready to play. For maximum playtime, fully charge the battery. You can play while charging. Red Light when charging: - slowly flashing Red indicates battery is charging - solid Red indicates battery is fully charged To charge the battery: Step 1: Pull down the rubber flap from the top to access the Micro USB Charging Connector.
Charging the Battery (continued) Insert the larger end of the Micro USB charging cable into either a USB wall charger for a Smartphone or iPhone (a USB wall charger that is 5V 1.0A up to 5V 2.4A maximum) or a USB port on your laptop/computer to charge the OontZ Angle 3 PLUS battery.
Battery Features You can play the OontZ Angle 3 PLUS while it is charging. Power Saving Feature - When playing from battery power the OontZ Angle 3 PLUS will turn off after 15 minutes of not playing audio to conserve the battery charge. * - When plugged into a charging source the OontZ Angle 3 PLUS will remain on until you turn the power off. You can continue to keep the speaker plugged into a charging source even when it is fully charged.
Turning On and Off Blue Light Turn ON Press and Release the Power Button - Blue Light will turn on Flashing Blue indicates the speaker is on and in pairing mode Solid Blue indicates the speaker is on and connected to a source device and ready to play Turn OFF Power Button Press and Hold Down the Power Button for 2 Seconds - Blue Light will turn off Page 7
Pair & Connect -- Step 1 - Make sure your OontZ Angle 3 PLUS battery has a sufficient charge, it is not able to connect when the charge is too low - Your audio source device needs to be within 33 unobstructed feet of the OontZ Angle 3 PLUS Turn ON your OontZ Angle 3 PLUS The Blue Light will turn on. If the Blue Light is flashing the OontZ Angle 3 PLUS is ready to pair and connect.
Pair & Connect -- Step 2 --- From Your iPhone, iPad, or iPod -- From Your Smartphone, Tablet and Mobile Devices - Go to Settings > Bluetooth, check Bluetooth is on - Select ‘OontZ Angle 3 PLUS’ when it appears under DEVICES - The speaker will connect in a few seconds - The Blue Light will turn solid blue - You can now play your audio wirelessly to your OontZ Angle 3 PLUS - Go to Settings > Bluetooth, check Bluetooth is on - Scan or Search and select ‘OontZ Angle 3 PLUS’ when it appears under AVAILABLE DE
Pair & Connect -- Step 2 --- From Your Amazon Echo Dot Turn on your OontZ Angle 3 PLUS first and make sure it is in pairing mode (refer to Page 8) To pair and connect your OontZ Angle 3 PLUS the first time from the Amazon Echo Dot you need to use the Alexa app on your iPhone, iPad, Smartphone, or Tablet. First make sure to disconnect any other Bluetooth device from the Amazon Echo Dot. The Amazon Echo Dot can only connect to one Bluetooth device at a time.
Pair & Connect -- Step 2 --- From Your Amazon Echo Dot (continued) Now that the Amazon Echo Dot is paired to the OontZ Angle 3 PLUS, if the speaker becomes disconnected or turned off, to re-connect turn on the OontZ Angle 3 PLUS and just say “Alexa, connect my speaker ” or “Alexa, pair” Important Note: When the OontZ Angle 3 PLUS is playing from battery power and connected to the Amazon Echo Dot, the Amazon Echo Dot disables the power saving feature on the OontZ Angle 3 PLUS.
Playing From Non-Bluetooth Audio Source Devices Using the 3.5mm Audio Cable - Make sure your OontZ Angle 3 PLUS battery has a sufficient charge Plug one end of the included 3.5mm audio cable into the AUX IN Jack on the back of your speaker. Plug the other end of the 3.5mm audio cable into the headphone jack on your non-Bluetooth audio device. You are now ready to play. Note: The Bluetooth on the OontZ Angle 3 PLUS is disabled when the 3.5mm audio cable is connected to the speaker. You need to remove the 3.
IPX5 Water Resistant No more worries about the rain or getting splashed Listen to music in the shower Perfect for taking to the beach or by the pool Gentle Water Spray or Splash is okay DO NOT allow speaker to sit in water DO NOT allow speaker to submerge fully or partially in water IPX5 rating - The OontZ Angle 3 PLUS can resist gentle water spray & splash but cannot be partially or fully submerged or left in a wet environment for an extended period of time, any of which could cause unrepairable damage
Wireless Hands Free Personal Speakerphone The Wireless Hands Free Personal Speakerphone feature works for calls with Smartphones and iPhones only, connected over Bluetooth. Bluetooth Button (Dual Function) To answer an Incoming Call / To End a Call Press and Release the Bluetooth Button To Reject an Incoming Call Press and Hold Down the Bluetooth Button for 3 Seconds Please keep the speaker close in front of you so you may be heard clearly by the listener.
Troubleshooting For the most up to date troubleshooting tips please visit: TheOontZ.com/troubleshooting/oontz-angle-3-plus OontZ Angle 3 PLUS will not turn on • The battery may have become fully drained. Charge the OontZ Angle 3 PLUS using a USB wall charger from a Smartphone/iPhone or tablet for at least 15 minutes, then press the power button to turn the speaker on. Then continue charging the battery. • Reset the OontZ Angle 3 PLUS, follow the reset instructions on page 20.
Troubleshooting Cannot pair or connect to the OontZ Angle 3 PLUS (continued) -- For iPhone, iPad, iPod • Turn off the OontZ Angle 3 PLUS speaker. Go to the Bluetooth device list on your iPhone, iPad or iPod and check if the OontZ Angle 3 PLUS is listed. If it listed press the icon next to the OontZ Angle 3 PLUS and then forget this device, twice. Restart your iPhone, iPad or iPod. Next reset the OontZ Angle 3 PLUS, following the instructions on page 20.
Troubleshooting Cannot pair or connect to the OontZ Angle 3 PLUS (continued) -- For Windows systems • Turn off the OontZ Angle 3 PLUS speaker. Please go to the Bluetooth device list and if the OontZ Angle 3 PLUS is listed please remove it. With the OontZ Angle 3 PLUS removed or if was not listed, restart your Computer. Next reset the OontZ Angle 3 PLUS, following the instructions on page 20. After you have reset your speaker, try to pair and connect again from your Computer.
Troubleshooting Poor sound quality when connected over Bluetooth • Your Bluetooth device may be out of range, move closer within 30 unobstructed feet. • Remove the OontZ Angle 3 PLUS from the Bluetooth device list on your source device, restart your source device, and then re-pair and connect to the speaker. • Turn your OontZ Angle 3 PLUS off and back on. • Some devices need to have their WIFI turned off to improve audio quality over Bluetooth.
Troubleshooting If you're having trouble trying to connect your Amazon Echo Dot to your OontZ Angle 3 PLUS • Make sure that the OontZ Angle 3 PLUS is not connected to any other audio source device. If the blue light is solid you will need to disconnect the currently paired audio source device (see page 8) • Check that the battery for your OontZ Angle 3 PLUS has a sufficient charge, plug your speaker into a charging source. • Disconnect any other Bluetooth devices from Amazon Echo Dot.
Resetting Your OontZ Angle 3 PLUS Step 1: Remove the Micro USB charging cable and 3.5mm Audio cable, if connected Step 2: Press and Release the Power Button Step 3: Insert either a toothpick or straightened paper clip into the AUX IN jack until it makes contact with the micro switch. Gently push and release the switch and the speaker will reset.
Customer Support If you have any issues with your OontZ Angle 3 PLUS, we want to assist you. Please contact us by visiting: TheOontZ.com/support and fill out our customer support form. Safety and Precautions 1. Follow all instructions – All operating and use instructions should be followed. 2. Do not use this speaker near water while it is plugged in for charging, due to risk of electric shock. 3. Protect the Micro USB charging cable from being pinched, particularly at the connectors. 4.
Safety and Precautions (continued) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.