User's Manual

Charging your
OontZ Angle 3XL
To charge your OontZ Angle 3XL, plug the
connector end of the included power
adapter into the Charging Jack (16). Plug
the other end into a wall outlet. You can
play your speaker while charging.
- When charging, the Charging Indicator
Light (1) will flash red, slowly.
- When fully charged it will turn solid red.
- The speaker will take about 4 hours to
fully charge. We recommend you fully
charge your speaker during the first use.
Note: When playing from battery power the
OontZ Angle 3XL will turn off after 30 minutes
of not playing audio.
4
Pairing and Connecting the OontZ Angle 3XL to your Bluetooth device:
smartphone, iPhone
TM
, tablet, iPad
TM
, Bluetooth iPod
TM
5
Step 1 – To turn on your OontZ Angle 3XL press and release the ON/OFF Button (2).
The Bluetooth Indicator Light (3) will flash blue and you will hear the voice prompt:
“Ready for connecting”. This indicates that the speaker is in pairing mode and it is ready
to pair and connect to your device.
Step 2 – Enable the Bluetooth function on your device and then search/scan for the
OontZ Angle 3XL. When “OontZ Angle 3XL” appears on the Bluetooth device list, select
it and your device will pair and connect to the speaker. Make sure your device indicates
that it is connected to “OontZ Angle 3XL” in your device list.
If your device requests a password, enter “0000”.
Step 3 – The Bluetooth Indicator Light (3) will turn solid blue to
indicate that the OontZ Angle 3XL is paired and connected to your
device and you will hear the voice prompt: “Connected”.
You can now play wirelessly from your device.
- PAGE 4 -