User's Manual

Note 1. The OontZ Angle 3XL can only be connected to one device at a time. You

will need to disconnect the ﬁrst device from the OontZ Angle 3XL before trying

to pair to another device: Press and hold the Bluetooth button for 3 to 5

seconds for the speaker to enter pairing mode, it will disconnect from the

current device when entering pairing mode. The blue light will ﬂash indicating

the device is disconnected and the OontZ Angle 3XL is in pairing mode. You can

then pair and connect to the next device.

Note 2. The OontZ Angle 3XL will automatically try to pair to the last connected

device each time it is turned on and that device is or comes within range. If the

OontZ Angle 3XL successfully connects to the last device it will prevent any other

device from pairing to it, until that current device is disconnected.

Note 3: You can play wirelessly to your speaker up to 33 unobstructed feet

away from your device

Pairing and Connecting the OontZ Angle 3XL to your Bluetooth device:

smartphone, iPhone

, tablet, iPad

, Bluetooth iPod

(continued)

You can control the play functions from your device or from the OontZ

Angle 3XL. Please keep your device volume setting above 60%.

Important Note: If you have previously turned the volume down on your OontZ

Angle 3XL you may need to increase it to full volume in order to reach maximum

overall volume, even if your device volume is already at 100%. You can press

and hold down the Volume + Button (11) until the Bluetooth Indicator Light (3)

ﬂashes to indicate that the speaker is at maximum volume. You can then ﬁne

tune the volume from your device.

To increase volume, press and release the Volume + Button (11). Press and

hold down the button to increase volume multiple levels.

To decrease volume, press and release the Volume – Button(10). Press and

hold down the button to decrease volume multiple levels.

To skip to the beginning of a track, press and release the Back/Previous Track

Button (6) . Press and release again to go to previous track.

To pause or play, press and release the Pause/Play Button (8).

To skip to the next track, press and release the Next Track Button (9).

Playing from your Bluetooth device: smartphone,

iPhone

, tablet, iPad

, Bluetooth iPod

- PAGE 5 -