Product Manual

To bring you a better experience, r
ead this manual carefully
and please refer to your mobile phone or your
electronic product manual.
Connecting Ball
Silicone Pads
Magnetic wireless
RGB Light
Char
ging area
Charging port
Metal Hook
2*Metal Ring
Metal Ring
locator card
A to C cable
Air Vent Clip
1.Turn the nut counterclockwise t
o release the metal hook slowly
to the maximum length.
2. Along the ventilation blades’ gap, insert the metal ends, then
adjust the position slowly until the ventilation blade snaps into the
metal hook.
3. Adjust the angle of the upper and lower ventilation blades to snap
into the grooves on both sides of the clip. Finally, turn the nut
clockwise to fix.
1. Unscrew the fixed nut, let the connecting ball through the fixed
nut (The thread must face the groove), then turn the nut
clockwise to fix.
Instru
ction
Instru
ction
Fasten y
our iPhone 12/13 series phone directly to the magnetic
mount without attaching extra metal rings/tools.
iPhone 13/12 Series & Magsafe
Cases:
When you use an iPhone 12 or iPhone 13 with a case (not a Mags
afe
case), or another iPhone(not iPhone 12/13), you need to use the metal
ring and hold it close to the magnetic stand.
Suitable for Other Phones & Cases
：
+
+
Q1: Can both iPhone 13/12 series and M
agsafe case use
this magnetic phone holder directly?
A1: Yes, iPhone 13 Pro Max/ 13 Pro/ 13/ 13 Mini/ 12 Pro Max/
12 Pro/ 12/ 12 Mini/ Magsafe Case/ Magnetic Case, etc.,
you can use this magnetic wireless car charger directly.
Q2: When do I need to use a metal ring, and when do I not?
A2: The metal ring is not required when you use the iPhone
13/12 series without a case or with a Magsafe case; the metal
ring is required when you use another iPhone(not iPhone 12/
13 series), or iPhone 13/12 but with a normal case
(not a Magsafe case).
Q3: Will this metal ring affect wireless charging with
Magsafe or other chargers?
A3: Don't worry. Can use it with branded chargers like Magsafe.
Please read this oper
ation instruction carefully and keep
it properly before using this product.
Product name
Model
Size
Net Weight
Applicable Places
Applicable Model
Output
Product List
2 * Metal Ring,1* Alcohol Pad,
2 * Protective film,1* locator card
1* Mag-safe Car Charger
1* Air Vent Clip
MagSafe magnetic suction
wireless charging bracket
CT5-49
ϕ 61*35.8 (mm)
130g
Air Vent
iPhone
5W/7.5W/10W/Q1 15W
1.Please use QC2.0 3.0 or PD car charge
r.
2. Metal accessories (metal pad, popsocket) or credit
cards will interfere with charging. The cases
containing metal, such as Pitaka, Evutec and Spigen
QNMP, will trigger foreign object detection and
interrupt charging.
3. Using the phone for GPS or listening to music
while charging will significantly affect the charging
speed. When using GPS applications, the power
consump- tion may be higher than the charging
speed.
4. It is normal for the wireless charger to have slight
heating during use. If you encounter serious heating,
please suspend use and contact us.
1. After plugging into DC power, the LED remains on for
3S and then goes out.
2. When Wireless Charger has devices connected to it,
when the mobile phone is charged, the LED goes out
Automatically; when the mobile phone is removed, the
LED remains on.
3. When not charging, the LED turns on and the surface
temperature keeps normal temperature; when charging,
the surface temperature is below 40℃.
Product Ov
erview
About the mechanism for using refri
geration:
How to mount th
e metal ring?
①
How to u
se this clip of air vent?
②
Instruction A
③
Instruction B
④
Question Answer:
⑤
Precautions
Product Specifications
1. Use wet & dry tissue to wipe first
2
. Determine the center by using a metal ring
locator card(Align the metal ring locator card
up and down and place it on the back of the
iPhone/iPhone case)
3. Stick the protective film on the center of
the iPhone/iPhone case;
4. Tear off the protective film of the metal ring
and stick it on the center.
FCC Statement
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The distance between user and products should be no less than 20cm.