Quick Guide
MICRO SD
HDMI INPUT
The projector can be connected to a variety of HDMI compatible devices via a
wired connection, such as laptop, smartphone, tablets, PSP, etc.
Please note the HDMI signal takes precedence over the USB drive inputs.
NOTE: Some devices may require an adapter to connect to your device.
To determine what type of adapter you need to use, please reference the
compatibility section of this manual. (For example, iPhone or iPad need
a Lighting to HDMI AV adapter as below.)
VIDEO CONTROLS
Before control, activate the control panel by touching the confirm button.
1. Pause: tap the confirm button.
2. Fast forward: touch the button. Each will increase the speed by x2, x4, x8,x16.>
3. Rewind: touch the button. Each will increase the speed by x2,x4,x8,x16.<
4. Exit: tap the button to return to the video file list. Tap this button again to
return to the main menu.
VOLUME CONTROL:
tap the button. Then use the and buttons to increase or decrease the > <
volume.
Devices with HDMI
port
Devices with mini
HDMI port
Devices with micro
HDMI port
★ HDMI to HDMI cable
★ HDMI to HDMI cable★ Mini HDMI to HDMI adapter
★ HDMI to HDMI cable★Micro HDMI to HDMI adapter
1
2
3
USB-C
USB-C
iOS devices with
lightning port
Devices with USB-C
(USB type C) port
Devices with USB-C
(USB type C) port
★ HDMI to HDMI cable★Lightning digital AV adapter
★ HDMI to HDMI cable★USB-C to HDMI adapter
★USB type C to HDMI cable
4
5
6
The products don’t include any HDMI adapter
PHOTO CONTROLS
When playing a photo file, the projector will automatically enter SlideShow
mode. While in this mode, each photo in the file list will automatically play
in order.
Before control, activate the control panel by touching the confirm button.
1. Pause SlideShow: touch the confirm button.
2. Resume SlideShow: touch the confirm button.
3. Play next image: touch the button. >
4. Play previous image: tap the button.<
100
WIRELESS CONNECTIVITY
The projector support wireless connection with some smart phones and tablets,
include i.O.S, Android and Windows 10 devices.
1, Connect projector to the wifi router.
Android Device
1, Turnon the miracast, some devices named ‘smart view’, ‘screen sharing’,
‘multi screen’ or others.
2, Check the devices list and choose the projector, which named PRO-XXXXXX.
Win10 device
Be sure your Win10 device support wireless connection.
Open the operation center in the right corner and choose project.
then you can find ‘Connect to wireless display, tap it, the Win10 device will search
the display devices automatically, then projector will show in the device list,please
connect to the projector(named PRO-XXXXXX).
Project
Settings
WLAN
WLAN
Mobile 4G
Office001
Office002
PRO-xxxxxx
No Internet Connection
CHOOSE A NETWORK...
Mobile 4G
192.168.49.1
WiFi AP
Setting
Mobile
192.168.xxx.xxx
WiFi AP
Setting
Open the browser of your device and log on the URL for setting.
The URL address is 192.168.49.1
Connect the Wi-Fi of your device to the hotspot of projector.
Projector name: PRO-xxxxxx , Password: 12345678
STEP1
(Pic1)
STEP2
(Pic2)
After connection to the wifi router, the URL will be changed, Please check the new
one displayed in the interface of projector,and log on new URL for more setting or
upgrade.
NOTE: Upgrade the software in the setting of URL, please see Pic3.
Pic1 Pic2 Pic3
i.O.S Device
1, Be sure your device connected to the hotspot of projector, or your device and
projector connected to the same Wi-Fi router.
2, Tap the screen sharing and choose the projector, which named PRO-XXXXXX.
NOTE: Normally, You need upgrade the software of projector if ios upgraded.
120inch
100inch
80inch
60inch
40inch
20inch
3.20m2.65m2.13m1.60m1.07m0.56m