User Manual

922BT Bluetooth Stereo Headphone User Manual
OPERATION INSTRUCTION
a) To turn on, press and hold the MFB button for approximately 2 seconds, the headphone will have a prompt tone
and the blue indicator light will flash several times; it should automatically connect to last connected device.
b) To turn off, press and hold the MFB button for approximately 4 seconds. When turning off, the headphone will
have a prompt tone and red LED light will flash one time,then turn off
c) Pairing with Bluetooth Devices, press and hold the MFB button for approximately 4 seconds, the headphone will
have a prompt tone and the LED light on the headphone will flash red and blue in an alternating manner.(Note:
The headphone will enter standby mode if not paired within 3 minutes)
d) Multi-pairing, Phone 1 connected with earphone successfully, Then turn on Bluetooth of phone 2 and
connect .Then it can connected with two phone at the same time .Earphone will default device which connected
first as priority device .
Using the 922BT headphones
e) Adjusting Volume
Function
Operation
Notes
Increase volume
Single press or press and hold the
Volume up V+ button
When the Volume reaches the
minimum or maximum level the AF16
will produce a short tone
Decrease volume
Single press or press and hold the
Volume Down V-button
f) Controlling Phone Calls
Status
Function
Operation
Incoming call
Answer a call
Single press the MFB button
Reject a call
Press and hold the MFB button for 2
seconds
Call in progress
End a call
Single press the MFB button

Summary of content (3 pages)