User's Manual

After answering: Blue LED light flash
twice per 1s
Reject call
Long press button" "about 2
seconds
After reject call blue LED light solid
on
End call
Short press button" "
The blue light flashes twice for 5
seconds
Last number redial
Long press button" "about 2
seconds
Red light flash interval 200ms
Sound transfer
When you answer the call, press
the "power on / off" button for 2
seconds to switch the call between
the
Blue light is always bright
Call to Keep
When the two sides call,
third-party calls, long press
"power on / off" button, you can
keep the current call, answer
third-party phone
Blue light is always bright
Unlock the call
When the two sides call,
third-party calls, short press
"power on / off" button, you can
hang up the current call, answer
third-party phone
After the call is released, the blue
light flashes twice for 5 seconds
Line in input
Insert the Line line, the Bluetooth
sound source is cut off, then the
Bluetooth headset can hear the
line to play the music, this time
Bluetooth is not shut down to be
manually shut down.
The call comes in when
playing the music
When playing music, there is a
phone call, the music is
automatically paused, and the
music automatically plays the line
after the call ends.
Bluetooth pairing
In the shutdown state, long press button“ ”about 3 seconds, there is “power on”voice prompt, Release the
button, if the headset is the first time to power on, it will automatically enter the pairing mode. If there is
information of matched device, the bluetooth headphone will enter the standby state (Bluetooth headset will
automatically return to the phone, the connection time is 3 minutes), Blue light interval 200ms Flashing at this time.
If not connected to the device, the device will automatically shutdown after standby 10 minutes.
Trouble shooting
Q1. Why can’t I power on the headphone?
A1.1. The earphone may have run out of the battery power. Please charge the battery using the charging cable.