Quick Start Guide

Quick Start Guide
Smart Wireless Cube Camera
Quick Start Guide
Smart Wireless Cube Camera
Model: E96K
Welcome
Thank you for choosing our smart camera.
Getting started is easy.
1. What’s Included
Security Camera
Reset Needle
(Optional)
3M tape
(Optional)
Power Adapter
Quick Start Guide
3. Connection Preparation
Bring the camera and phone within 1 to 3 feet (30 to
100 centimeters) of the router.
Router
30cm~100cm
Camera
Smartphone
Note: Make sure smart phone is connected with your
wireless router.
Please note the camera is only working under 2.4G Wi-Fi,
not support 5G Wi-Fi.
4. Get the APP and Account
For the best experience, please download the "Tuya
Smart" APP to your smartphone from App Store or
Google Play, or you can also scan the QR code below,
the APP icon will be displayed after installed successfully.
Tuya Smart
Tuya Smart
Launch the app from your smartphone and click the
Sign Up button. Follow the on-screen instructions.
You can place your camera on a shelf or other flat surface,
or you can mount it to the wall.
To mount your camera to the wall:
8. Place or Mount Your Camera
Connect the power to the camera by DC5V/1A Micro USB
Power Adapter.
6. Connect the power to the camera
You can use 3M sticker to mount the camera on the wall.
You’re done!
Congratulations! Your camera is set up and ready to go.
All trademarks are used for reference purposes only.
Thanks again for choosing our smart camera! Make
life safe in your hands!
Boost security mobility in your smartphone!
Appendix: Camera LED Guide
Model: E96K
Insert the Micro SD card gently on the side edge
of camera.
5. Insert the Micro SD card
Use the Reset Needle to press the reset button of
camera above 5 seconds, then release the button,
a red LED on the front of camera will blink quickly.
ollow App's instructions to complete network
pairing process, the device will connect to your
Wi-Fi network successfully.
The blue light is on, camera is ready for viewing.
7. Set up your camera
6XKYYZNK8KYKZH[ZZUT
LUXGHU\KYKIUTJYZU
YZGXZ8KYKZVXUIKYYOTM
NO. LED Status Camera Status
1 System starting upRed LED on
2 Standby for configurationRed LED blinks quickly
3 Network pairingBlue LED blinks quickly
4 Camera onlineBlue LED on
5
OTA upgrade Red LED blinks slowly
SS
2. Product Details
3M tape
Indicator light
Lens
Base
Microphone
Speaker
Power interface
MicroSD card
Reset
(R[KROMNZ
HROTQY
FCC ID: Z63-E96K