Quick Start Guide

Quick Start Guide
Smart Wireless P/T Camera
Model: E95A
Welcome
Thank you for choosing our smart camera.
Getting started is easy.
What’s Included
Security Camera
Bracket (Optional)
Power Adapter
USB Cable
Product Details
1. Connection Preparation
Bring the camera and phone within 1 to 3 feet (30 to 100 centimeters)
of the router.
Router
30cm~100cm
Camera
Smartphone
Note: Make sure smart phone is connected with your wireless router.
Please note the camera is only working under 2.4G Wi-Fi, not support
5G Wi-Fi.
For the best experience, please download the "Tuya smart" APP to your
smartphone from App Store or Google Play, or you can also scan the
QR code below, the APP icon will be displayed after installed
successfully.
2. Get the APP and Account
Launch the app from your smartphone and click the Sign Up button.
Follow the on-screen instructions.
You can place your camera on a shelf or other flat surface, or you can
mount it to the wall.
To mount your camera to the wall:
6. Place or Mount Your Camera
Connect the power to the camera by Micro USB Power Adapter.
(DC5V/1.5A)
4. Connect the power to the camera
Fasten the mounting screw into the wall, and then mount the camera
from the screw.
If you’re mounting the camera to drywall, be sure the plastic drywall
anchors that are provided.
You’re done!
Congratulations! Your camera
is set up and ready to go.
All trademarks are used for reference purposes only.
Thanks again for choosing our smart camera! Makelife safe in
your hands!
Boost security mobility in your smartphone!
Appendix: Camera LED Guide
NO. LED Status Camera Status
1 System starting upRed LED on
2 Standby for configurationRed LED blinks quickly
3 Network pairingBlue LED blinks quickly
4 Camera onlineBlue LED on
5
OTA upgrade Red LED blinks slowly
Wall Mount Screw Sets
(Optional)
Light sensor
Power interface
Lens
Infrared lights
Microphone
Speaker
Mounting Hole
MicroSD card
Reset
Insert the Micro SD card gently on the side edge of camera.
3. Insert the Micro SD card
Press the Reset button for above 5 seconds, then release the button
to reset the camera, then the LED light will blink quickly.
Click "Add Device" or "+" on the right corner to add device; Then click
" Security&Sensor" to select" Smart Camera"；
5. Set up your camera
Follow the App's instructions and input the right wifi password; Point
the QR code to the camera lens for 15-20cm ; Click"HEARD THE
BEEP" when you heard "dingding". After processing, it paired
successfully.
The blue light is on, camera is ready for viewing.
Smart Wireless P/T Camera
Quick Start Guide
Quick Start Guide
Model: E95A
Tuya Smart
Tuya Smart
Press the Reset
button for above
5 seconds
Blue LED
blinks