User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION AND SETTINGS
- 3. SOFTWARE OPERATION (IE BROWSER)
- 4. PARAMS SETTINGS
- 4.1. Device Info.
- 4.2. Video Info.
- 4.3. Audio Settings
- 4.4. Motion Detection
- 4.5. Alarm Settings
- 4.6. Basic Network Settings
- 4.7. Wireless Lan Settings
- 4.8. UPNP Settings
- 4.9. Cruise Settings
- 4.10. Indicator Settings
- 4.11. User Manage
- 4.12. Log
- 4.13. Date Time Settings
- 4.14. Multi-Device Settings
- 4.15. Mail Service Settings
- 4.16. FTP Service Settings
- 4.17. SD Card Info.
- 4.18. Local Settings
- 4.19. System Tool
- 5. PLAYBACK
- 6. FREQUENTLY ASKED QUESTIONS
- 7. OBTAINING TECHNICAL SUPPORT
More Security, More Convenience www.apexis.com.cn / www.apexis.cc
Shenzhen Apexis Electronic Co., Ltd Tel: +86-755-26509025 Fax: +86-755-26509229
12 of 42
Clear Alarm: Click to stop the alarm manually when there is an alarm triggered, and pop-up prompt as
below:
Figure2.3
OSD Settings: Click it will pop-up the OSD settings interface, including OSD Color, Frequency, Image
Mirror and Flip.
Figure2.4
OSD: Means “On-Screen Display”
OSD Color: Including Disabled, Black, Red, Green, Blue, Purple, Gray, Silver, Yellow, Olive, Turquoise, White,
Light Blue etc.
Figure2.5
Frequency: Including 50HZ, 60HZ, Outdoor.
50HZ/60HZ for the users who use 50HZ/60HZ frequency, outdoor for the users who want to use this camera
to monitor the outdoor environment
NOTE: This camera normally should be used in a indoor environment