User's Manual

More Security, More Convenience www.apexis.com.cn / www.apexis.cc
Shenzhen Apexis Electronic Co., Ltd Tel: [phone] Fax: [phone]
15 of 42
the frame will change to red color .
: Click this one; you can view 4 Channels of cameras which connected, from CH1 to CH4. move the
mouse to the icon, the frame will change to red color
.
: Click this one; you can view 9 Channels of cameras which connected, from CH1 to CH9. move the
mouse to the icon, the frame will change to red color
.
NOTE: If you want to view 4/9 channels, you should set the Multi-Device firstly (See 4.14 Multi-Device
Settings)
Figure3.1
: PTZ speed: set value from 1 to 100, click the icon, it will back to factory settings.
: Brightness: set value from 0 to 255, click the icon, it will back to factory settings.
: Contrast: set value from 0 to 255, click the icon, it will back to factory settings.
: Hue: set value from -128 to 127, click the icon, it will back to factory settings.
: Saturation: set value from 0 to 200, click the icon, it will back to factory settings.
Figure3.2
There are 9 icons
at the bottom of the UI which show the status of each channel of the camera.
: Grey color: means there is no device connected to the main device from this channel.
: Green color: means the device connected from this channel, and it works well.
: Red color: means the device of this channel is recording.
: Yellow color: means set this channel in multi-device already, but it fails to connect to the main device.