User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION AND SETTINGS
- 3. SOFTWARE OPERATION (IE BROWSER)
- 4. PARAMS SETTINGS
- 4.1. Device Info.
- 4.2. Video Info.
- 4.3. Audio Settings
- 4.4. Motion Detection
- 4.5. Alarm Settings
- 4.6. Basic Network Settings
- 4.7. Wireless Lan Settings
- 4.8. UPNP Settings
- 4.9. Cruise Settings
- 4.10. Indicator Settings
- 4.11. User Manage
- 4.12. Log
- 4.13. Date Time Settings
- 4.14. Multi-Device Settings
- 4.15. Mail Service Settings
- 4.16. FTP Service Settings
- 4.17. SD Card Info.
- 4.18. Local Settings
- 4.19. System Tool
- 5. PLAYBACK
- 6. FREQUENTLY ASKED QUESTIONS
- 7. OBTAINING TECHNICAL SUPPORT
More Security, More Convenience www.apexis.com.cn / www.apexis.cc
Shenzhen Apexis Electronic Co., Ltd Tel: +86-755-26509025 Fax: +86-755-26509229
17 of 42
There are two option for stream, Main-Stream and Sub-Stream, users can set the stream based on the
actual operation environment, for example, if the band width is good enough, set Main-Stream as
Initial-Stream, or choose Sub-Stream will be better.
Set the parameters of Main-Stream and Sub-Stream as below:
Resolution: 640x480, 320x240 optional.
Frame Rate: Set the frame rate according to the band width. Frame rate could be “Auto” or “from 1fps to
30fps(Real time)”. if the network situation is not ideal, can reduce the frame rate to control the coding rate,
make the moving pictures more smoothly
Bit Rate: Higher bite rate means better quality images, but take more band width, so please adjust the
settings according to the actual band width. The range of bit rate from 128Kbps~4Mbps.
Figure3.5
Image Quality: Better image quality, higher bit rate value, and it will take more band width, the image quality
parameters could be set as below:
Figure3.6
NOTE: When the device runs, only can select Bit Rate or Image Quality either.
4.3. Audio Settings
Click “Audio Settings” to enter the interface: