User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION AND SETTINGS
- 3. SOFTWARE OPERATION (IE BROWSER)
- 4. PARAMS SETTINGS
- 4.1. Device Info.
- 4.2. Video Info.
- 4.3. Audio Settings
- 4.4. Motion Detection
- 4.5. Alarm Settings
- 4.6. Basic Network Settings
- 4.7. Wireless Lan Settings
- 4.8. UPNP Settings
- 4.9. Cruise Settings
- 4.10. Indicator Settings
- 4.11. User Manage
- 4.12. Log
- 4.13. Date Time Settings
- 4.14. Multi-Device Settings
- 4.15. Mail Service Settings
- 4.16. FTP Service Settings
- 4.17. SD Card Info.
- 4.18. Local Settings
- 4.19. System Tool
- 5. PLAYBACK
- 6. FREQUENTLY ASKED QUESTIONS
- 7. OBTAINING TECHNICAL SUPPORT
More Security, More Convenience www.apexis.com.cn / www.apexis.cc
Shenzhen Apexis Electronic Co., Ltd Tel: +86-755-26509025 Fax: +86-755-26509229
22 of 42
4.6.1 Static Address
Set network parameters manually
Figure5.1
● Media Port: Default is 38401.
● Web Port: Default is 80.
● Mobile Port: Default is 2012.
● RTSP Port: Default is 554.
● IP Address: Set the IP address of camera.
● Subnet Mark: Default is 255.255.255.0.
● Gateway: Set the gateway of IP camera. If the camera connect to extranet via router, then the gateway is
the router’s IP.
NOTE: Please don’t change the Media Port, Web Port, Mobile Port, RTSP Port if no necessary.
4.6.2 DHCP
Choose DHCP, the camera will get IP address automatically.
Figure5.2
● Media Port: Default is 38401.
● Web Port: Default is 80.
● Mobile Port: Default is 2012.
● RTSP Port: Default is 554.
NOTE: Please don’t change the Media Port, Web Port, Mobile Port, RTSP Port if no necessary.