User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION AND SETTINGS
- 3. SOFTWARE OPERATION (IE BROWSER)
- 4. PARAMS SETTINGS
- 4.1. Device Info.
- 4.2. Video Info.
- 4.3. Audio Settings
- 4.4. Motion Detection
- 4.5. Alarm Settings
- 4.6. Basic Network Settings
- 4.7. Wireless Lan Settings
- 4.8. UPNP Settings
- 4.9. Cruise Settings
- 4.10. Indicator Settings
- 4.11. User Manage
- 4.12. Log
- 4.13. Date Time Settings
- 4.14. Multi-Device Settings
- 4.15. Mail Service Settings
- 4.16. FTP Service Settings
- 4.17. SD Card Info.
- 4.18. Local Settings
- 4.19. System Tool
- 5. PLAYBACK
- 6. FREQUENTLY ASKED QUESTIONS
- 7. OBTAINING TECHNICAL SUPPORT
More Security, More Convenience www.apexis.com.cn / www.apexis.cc
Shenzhen Apexis Electronic Co., Ltd Tel: +86-755-26509025 Fax: +86-755-26509229
23 of 42
4.6.3 PPPoE
Set parameters here to enable PPPoE function.
Figure5.3
● Media Port: Default is 38401.
● Web Port: Default is 80.
● Mobile Port: Default is 2012.
● RTSP Port: Default is 554.
● Enable PPPoE: Choose Open to enable PPPoE function.
● PPPoE User: The account provided by ISP
● PPPoE Password: The password provided by ISP.
● PPPoE IP Addr. If PPPoE dial-up succeed, will display the IP address distributed by ISP.
NOTE: Please don’t change the Media Port, Web Port, Mobile Port, RTSP Port if no necessary.
Figure5.4
● DNS Server: Set DNS server
● MAC Address: MAC address of IP Camera.
If you don’t know Subnet Mask, Gateway, DNS Server. Please check the Local Area Connection Status of
your computer; it contains all these information, steps as below:
1. Control Panel > Network Connections > Local Area Connections > Support > Details
2. Find the local connection icon
from taskbar, left click it, choose Support > Details