User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION AND SETTINGS
- 3. SOFTWARE OPERATION (IE BROWSER)
- 4. PARAMS SETTINGS
- 4.1. Device Info.
- 4.2. Video Info.
- 4.3. Audio Settings
- 4.4. Motion Detection
- 4.5. Alarm Settings
- 4.6. Basic Network Settings
- 4.7. Wireless Lan Settings
- 4.8. UPNP Settings
- 4.9. Cruise Settings
- 4.10. Indicator Settings
- 4.11. User Manage
- 4.12. Log
- 4.13. Date Time Settings
- 4.14. Multi-Device Settings
- 4.15. Mail Service Settings
- 4.16. FTP Service Settings
- 4.17. SD Card Info.
- 4.18. Local Settings
- 4.19. System Tool
- 5. PLAYBACK
- 6. FREQUENTLY ASKED QUESTIONS
- 7. OBTAINING TECHNICAL SUPPORT
More Security, More Convenience www.apexis.com.cn / www.apexis.cc
Shenzhen Apexis Electronic Co., Ltd Tel: +86-755-26509025 Fax: +86-755-26509229
26 of 42
All the WiFi encryption mode should be the same as WiFi router which connected, and different encryption
has different authentication menu.
4.8. UPNP Settings
Click “UPNP Settings” to enter the interface:
Figure5.9
Enable UPNP: Set UPNP function ON/OFF.
Select it to enable UPNP, then the camera will do port forwarding automatically.
It’s helpful for using DDNS, if your router support UPNP, then you no need do port forwarding in router.
NOTE: Here UPNP only for port forwarding now. It has much relation with security settings of your router,
make sure the UPnP function of router is ON.
ATTENTION: If your router doesn’t support UPNP function, it may show error information. So we recommend
you do port forwarding manually in your router.
4.9. Cruise Settings
Click “Cruise Settings” to enter the interface:
Figure6.0