User's Manual

More Security, More Convenience www.apexis.com.cn / www.apexis.cc
Shenzhen Apexis Electronic Co., Ltd Tel: [phone] Fax: [phone]
27 of 42
Cruise means autocycle rotation between the different positions, these positions have been set as preset with
residence time and Pan/Tilt speed in advance. This device supports upto 10 cruise track, each cruise can
support upto 9 preset, steps as below:
Figure6.1
1. Set the cruise name.
2. Enable the state
3. Choose the SN you want to set,
4. Double click the number or click Edit, will pop-up the settings window. (Figure 6.2)
Figure6.2
5. Enable state.
6. Choose the preset which will be set. This camera supports 9 preset.
7. Set the residence time, could be 0 to 10 seconds.
8. Set the rotation speed, could be 0 to 10, and 0 means the fastest, 10 means the most slowly.
9. Click OK to save the settings.
After all done, click save to submit, it will be shown as valid in the cruise list on leftside. If unselect the state, it
will be shown as invalid.