User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION AND SETTINGS
- 3. SOFTWARE OPERATION (IE BROWSER)
- 4. PARAMS SETTINGS
- 4.1. Device Info.
- 4.2. Video Info.
- 4.3. Audio Settings
- 4.4. Motion Detection
- 4.5. Alarm Settings
- 4.6. Basic Network Settings
- 4.7. Wireless Lan Settings
- 4.8. UPNP Settings
- 4.9. Cruise Settings
- 4.10. Indicator Settings
- 4.11. User Manage
- 4.12. Log
- 4.13. Date Time Settings
- 4.14. Multi-Device Settings
- 4.15. Mail Service Settings
- 4.16. FTP Service Settings
- 4.17. SD Card Info.
- 4.18. Local Settings
- 4.19. System Tool
- 5. PLAYBACK
- 6. FREQUENTLY ASKED QUESTIONS
- 7. OBTAINING TECHNICAL SUPPORT
More Security, More Convenience www.apexis.com.cn / www.apexis.cc
Shenzhen Apexis Electronic Co., Ltd Tel: +86-755-26509025 Fax: +86-755-26509229
28 of 42
4.10. Indicator Settings
Click “Indicator Settings” to enter the interface:
Figure6.3
Set the pilot lamp mode, the following three options:
(1) Blink when network connected; Off when no connection: Twinkle while connect to the internet and
turn off when departed.
(2) Blink when network connected; Slow blink when no connection: Twinkle while connect to the internet
and more slower when departed.
(3) Always off: Keep OFF.
4.11. User Manage
Click “User Manage” to enter the interface:
Figure6.4
Every camera supports 16 users, and every user can be divided into three grades including Super
Administrator, Administrator, Operator, Visitor.
Click Add, will pop-up the window as below:










