User's Manual

More Security, More Convenience www.apexis.com.cn / www.apexis.cc
Shenzhen Apexis Electronic Co., Ltd Tel: [phone] Fax: [phone]
32 of 42
SMTP Server: The sender’s SMTP server.
SMTP Port: The sender’s SMTP Port, usually is 25, some SMTP server have its own port, such as the smtp
port for Gmail is 465.
Auth User: Verify the user settings
SMTP User: Set sender’s user name.
SMTP password: Set sender’s password.
4.16. FTP Service Settings
Set FTP service, Snapshots will be delivered to appointed FTP server when alarmed.
Click “FTP Service Settings” to enter the interface:
Figure7.2
Enable FTP: Set FTP function ON/OFF.
FTP Server: Set FTP server address.
FTP Port: Set the port of FTP server, default is 21.
FTP User: Set the user name of FTP server.
FTP Password: Set the password of FTP server.
Upload Folder: Set the path of remote FTP server. Make sure that the folder you plan to store images exists.
For camera couldn’t create the folder itself. Also, the folder must be erasable.
FTP Mode: It supports standard (POST) mode and passive (PASV) mode.
Click save to submit, click test to check the settings.
NOTE: Only alarmed, there will be 3 snapshots sent to the FTP server every 1 second.
4.17. SD Card Info.
Click “SD-Card Info” to enter the interface: