User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION AND SETTINGS
- 3. SOFTWARE OPERATION (IE BROWSER)
- 4. PARAMS SETTINGS
- 4.1. Device Info.
- 4.2. Video Info.
- 4.3. Audio Settings
- 4.4. Motion Detection
- 4.5. Alarm Settings
- 4.6. Basic Network Settings
- 4.7. Wireless Lan Settings
- 4.8. UPNP Settings
- 4.9. Cruise Settings
- 4.10. Indicator Settings
- 4.11. User Manage
- 4.12. Log
- 4.13. Date Time Settings
- 4.14. Multi-Device Settings
- 4.15. Mail Service Settings
- 4.16. FTP Service Settings
- 4.17. SD Card Info.
- 4.18. Local Settings
- 4.19. System Tool
- 5. PLAYBACK
- 6. FREQUENTLY ASKED QUESTIONS
- 7. OBTAINING TECHNICAL SUPPORT
More Security, More Convenience www.apexis.com.cn / www.apexis.cc
Shenzhen Apexis Electronic Co., Ltd Tel: +86-755-26509025 Fax: +86-755-26509229
34 of 42
Figure7.5
Enable Alarm Audio: Set audio ON/OFF once alarmed.
Enable Alarm Rec: Set alarm record function ON/OFF.
Alarm Rec Time: Set alarm record duration time, can be 30s, 1min, 2min, 3min, 5min.
Manual Rec Pack Time: Set the manual record file pack time, can be 30min, 1h, 2h, 3h, 5h.
Record Path: Set the path for record file saved..
Capture Path: Set the path for snapshot saved.
4.19. System Tool
Click “System Tool” to enter the interface:
Figure7.6
● Reboot Device: Click to Reboot the camera.
● Restore Factory Settings: Click it, all the parameters will be back to factory settings.
● Upgrade Device Firmware: Click “Browse”, choose the correct system file for upgrade, then click “Start”.
● Upgrade Device Web UI: Click “Browse”, choose the correct Web UI file for upgrade, then click “Start”.
NOTE: Please use the correct upgrade file, must keep the power on when upgrading, wired mode suggested,
because wrong operation or incorrect upgrade file maybe damage the device.