User's Manual

IPCAM User manual
1) Use Network cable connect IP Camera to the LAN.
2) Enter IP Camera Tool to set the basic configuration,(details:2.1)
3) Login the Camera homepage ad Administration.
4) Enter DDNS Settings Page and enable DDNS service. Click <Submit> and the
device will reboot (details:2.3.3.2)
5) You can access the Camera from Internet by domain name.
3.5 Static IP user
Static IP user is not need to use DDNS for remote access. When finished the setting of
the IP Camera in LAN, you can access the Camera directly from Internet by the WAN IP.
You can obtain the WAN IP by two ways.
Click to add our gadget to your Google Homepage
IP Address (Internet Protocol Address); This number is on
extrusive Number at Information technology devices (printer,
routers, modems, et al) use which identifies and allows them
the ability to communicate with each other on a computer
network. There is a standard
Figure 3.4
Obtain the WAN IP address from the router
Take the WRT54G router of LINKSYS for example,
1) Obtain the IP address of the router (LAN gateway address), user name and
password for logon to the router from the network administrator,
2) Enter the LAN IP address of the router; Open the Status page to find out the WAN
address of the router. In this example, the address is 116.25.51.115.
—29—