User's Manual

IPCAM User manual
5) Re-login the Camera homepage to check and make sure the DDNS Status and
UPnP Status is Succeed.
6) You only need to enter the domain name(domain name Port number
http://IPCAM.vicp.net:81/) in the IE address bar, the browser will visit the IP
Camera.
Wait for several minutes and the IP Camera will dial up to access the Internet
automatically, and the communication with the DDNS server is established successfully.
In the way, the user can access the IP Camera from a WAN by using the DDNS domain
name.
If the gateway settings and DDNS settings have been completed, enter the DDNS
dynamic domain name (for example, http://IPCAM.vicp.net/, do not add www.) in the
address bar of the IE to access the IP Camera. If multiple IP Camera are connected to
the same router, enter DDNS dynamic domain +port number (for example,
http://IPCAM.vicp.net:85/) in the address bar of the IE to access different IP Cameras.
4 APPENDIXES
4.1 Frequently Asked Questions
Note: Any questions you would meet, please check Network connections firstly.
Check the working status revealed by the indicators on the network server, hub, exchange
and network card. If abnormal, check the network connections.
4.1.1 I have forgotten the administrator username and/or password.
To reset the administrator username and password, Press and hold down the RESET
BUTTON for 10-15 seconds. Release the power button and the username and password
will be reset back to the factory default administrator username and password.
Default administrator username: admin
Default administrator password: No password
4.1.2 IP Address configuration
Check whether IP address of the IP camera server shares the same subnet as your work
station: Click My Computer >Control Panel> Network & Dial-up Connections > LAN >
Attributes >Internet Protocols (TCP/IP), and check IP Address and Subnet Mask. Make
sure they are in the same subnet when configuring IP Camera IP address manually.
Unable to access IP Camera via web browser
—31—