User's Manual
Table Of Contents
- 1 WELCOME
- 2. SOFTWARE OPERATION
- 3 Settings as Administrator
- 3.1 Multi-Device Settings
- 3.2 Network Settings
- 3.3 Basic Network Settings
- 3.4 Wireless Lan Settings
- 3.5 ADSL Settings
- 3.6 UPnP Settings
- 3.7 DDNS Service Settings
- 3.8 System Settings
- 3.9 Alias Settings
- 3.10 Date &Time Settings
- 3.11 Users Settings
- 3.12 PTZ Settings
- 3.13 Indicator Settings
- 3.14 Backup & Restore
- 3.15 Other Settings
- 3.16 Mail Service Settings
- 3.17 FTP Service Settings
- 3.18 Alarm Service Settings
- 3.19 Send Mail on Alarm
- 3.20 Path Settings
- 3.21 Server Push Mode (For Safari, FireFox, Google Browser)
- 3.22 Sign in mobile phone
- 4. APPENDIX
- 5. Specifications
- 6. OBTAINING TECHNICAL SUPPORT
MoreSecurity,MoreConvenience
3.12 PTZ Settings
Figure 8.6
1. Go center on boot: The camera rotate to the center automatically when it starts
2. PT speed: Set Pan / Tilt speed
3. Upward patrol speed: Set the speed of cruising upward
4. Downward patrol speed: Set the speed of cruising downward
5. Leftward patrol speed: Set the speed of cruising leftward
6. Rightward patrol speed: Set the speed of cruising rightward
NOTE: Value 0 means the fastest, value 10 means the slowest. In order to protect the camera’s motor, we
recommend that setting the speed to value 5.
3.13 Indicator Settings
Figure 8.7
Set the pilot lamp mode, the following three options:
(1) Non-connected network out: Twinkle while connect to the internet and turn off when departed
(2) Non-connected network with more slow-frequency flicker: Twinkle while connect to the internet and
more slower when departed
(3) Been extinguished: Keep OFF
3.14 Backup & Restore
Figure 8.8
38