User's Manual

Table Of Contents

Servo: AS-100(9 g) 3pcs

Speed controller:

ESC-30A

1pcs

Bettery packs:

9.6V/Ni-MH

1pcs

Charger:

1pcs

Transmitter:

ETC61-2.4GHz

1pcs

Receiver: ER61-2.4GHz 1pcs

Simulator cable: 1pcs

Belt: 1pcs

Manual: 1pcs

CD-Rom: 1pcs

Specifications

Function of Transmitter

Contents:

Thanks for purchasing E-Fly 100C radio control set. For safe use, please read this manual before

using carefully. Any damage or loss to radio control set and model due to inproper usew ill n ot b e

shouldered by Art-Tech.

ETC61-2.4GHz is a new ly develo pe d 6 cha nnel propo rtinal transmiiter.

The latest developed product of ART-TECH RC hobby corporation the 2.4GHz RC system uses

digital frequency-hopping technology, it has enormous advantage compared with traditional

system: no crystal, no frequency interference, short antenna length and low power consumption.

Four flying mode installed:A(aeroplane mode); V(V tail mode); C(CCPM helicopter mode);

H(helicopter mode) The swithc between each mode is very convenient. There is a reverse switch for Ch1,

CH2,CH4 and CH6 separately.The LCD on the transmitter can show voltage of transmitter,channel status,

flying mode and flying time.It has a function of auto-alarm for low voltage.

www.art-tech.com

Number of channels: 6

Charging jack: yes

3D switch: yes

Power supply: 12 V (1.5V * 8AA batteries)

Modulation: GFSK

Voltage Display: LCD

Color: Black

Antenna length: 15 cm

Using occasions: aircraft, helicopters

Certification: FCC, CE, RoHS

We do not offer servo, speed controller, battery or changer with the radio control system .

Users can by then spare parts.