User's Manual

www.art-tech.com

Menu introduction

After turn on the radio, the screen displays the time page. Press menu

several times to enter the required main menu, Press the sub button during

this period you can enter into the sub-menu of corresponding main menu.

In the menu operation, the success of the button operation will

accomplish with a prompt sound. If there is no prompt sound, maybe the

button is not in place or this button has no function in this menu. When the

special function button (y / up or n / down button) to confirm the

implementation of operation, there will be 3 prompt sounds; as for the

abolition of operation, there will be 3 demotion sounds. When menu setting

is complete, press the menu button or sub button for about 1 second you will

hear 2 prompt sounds, then release the button you will return to the time

page.

1. Press the menu button; enter into the data storage menu (Mode select

function).

2. Press the Left or right button, choose the right mode, press the y / up

button to confirm. (In the option number display areas the number of the

recently called file is displayed, as shown in Figure 1, the number of the

recently called file is the No.1 File. Yes means that the present chosen

mode is what is shown at the function display area, as shown in Figure,

the present chosen mode is A mode.) Of all the modes: A (aero plane

mode); V (V tail mode); C (CCPM helicopter mode); H(helicopter mode)

D(Delta plane mode)

1.2 Storage mode:

1. Press the sub button; enter into the mode menu (Save function).

2. Press the Left or right button, choose the right store location, press the y /

up button to confirm storage. You can store a total of 12 models.

1.3 Mode call:

1. Press the sub button; enter into the data call menu (Load function).

2. Press the Left or right button, choose a suitable stored location, press the

y / up button to confirm data call. (Note: Call will coverage the data value

being set now. non means no data has been stored in selected location.

As in Figure, H means in the storage location the model mode is

helicopter mode, L means Mode II and r means Mode I.)

1.1 Flying mode setting:

1. Mode selection

2. Servo Reversing settings

1. Press the menu button; enter into the Rev menu (Servo Reversing).

2. Press the Left or right button, choose a channel, press the y / up button to

change the Reversing setting.