User's Manual

3), Select Audio output
4), Select Optical audio
5), Choose Stereo uncompressed
6), Back to Display & sound screen , select Volume
7), Select Chat mixer
8), Choose Do nothing
Common issue Solution
1) Can’t power on
headset
2) Charging light off
1、Long press power on button for 3 seconds
2、Using USB cable to charge the headset ,
charging red indicating light on during charging
and off after fully charge at about 5 hours charging
Power off after 10 mins
Fully charge headset for 5 hours before use
No background sound
1 Plug in microphone for headset
2、When using Kinet for chatting, please set kinet
to open position and put kinect in a good position
facing you to receive your chat voice
3、When using Microsoft adapter , Please press
the mic mute off , mic volume can be adjusted
higher or lower by chat volume switch .
、
No mic sound
1 Optical cable not connected correctly , please
remove protection cover and connect with right
direction
2、setting should be : Setting -- Display & Sound
– ① optical --stereo uncompressed ( don't choose
stereo bitstream cut or off ② chat mixer -- Do
nothing
、
5, Common issue and solution
4, Operation method :
1) Connect transmitter and Xbox One console USB port using the short USB cable ,light flashing .
2) Long press power button for 3 seconds to power on the headset , the headset should auto
pair with the transmitter and solid blue light light up , if the headset light keep flashing , please
pair them once again .
3) During pairing , please power on Xbox One and do not play audio, place headset close to
transmitter within 50 cm and long press mute button on headset for 5 seconds and release
your finger when light keep fast flashing , then the light on transmitter and headset will become
solid blue.
4) Default setting for mute is off ( chat on ), if you want to mute your chat voice , please press the
mute button once and transmitter light will become red
5) Volume adjusting switch allow you to adjust the game background and chat volume .
EN
2), Select Display & sound