User's Manual

FUNCITON Operation Method LED Display
Power ON
Remove the earphone
from the charge box
Red and blue
lightsflickered alternately
Power OFF
Long press multi-function
button for 6 seconds (any
left or right ear)
The red light flashes
three times
Earphone
pairing
The earphone is
automatically pairing
when removed from the
charging bin
(L for host, R for slave
Red and blue lights
flickered alternately
Matching
success
search
H17T" device name, click
Red and blue lights
flickered alternately
Disconnect
The mobile phone
disconnects bluetooth
Red and blue lights
flickered alternately
Play to
suspend
music
Click the earphone
multifunction button (ren
Left and right ear)
Blue light every 5
seconds
Flash
Back to dial
the telephone
Double-click the earphone
multifunction button (ren
Left and right ear)
Blue light every 5
seconds
Flash
Switch song
Long press the L headset
for 2 seconds to paly the
next song .
Long press the R headset
f 2 d t l l t
Blue light every 5
seconds
Flash
Answering
calls
Click the earphone
multifunction button to
connect Listen for
incoming calls (either ear)
Blue light every 5
seconds
Flash
Decline a call
Long press the
multifunction button for
1.5 seconds
To reject
Blue light every 5
seconds
Flash
Low battery
of earphone
earphone battery lower
than 3.2v ear
Automatic shutdown
The red light flashed
three times
Battery LED
state
The red light flashes when the battery compartment
Full of electricity, the red light is always on
Charge the
earphone
State
electricity
Put the earphone into the charging bin and charge
automatically
On, full charged, light off
Warning:
Before using the device, read these security instructions and
store them for future reference.
> This device is not suitable for use by persons (including
children) with physical, sensory or mental disabilities.
Personnel who have not read this manual shall not use
this device unless instructed by the personnel responsible
for their safety and supervision.
> This device should not be exposed to dripping or splashing
water.
> This device is only suitable for temperate climate.
> Note: there is a risk of an explosion if the battery is
replaced incorrectly or if the battery is not replaced with
the same or equivalent battery.
> Batteries should not be exposed to overheating places,
such as the sun, fire and so on.
> If the battery wears out, it must be removed from the product.
> The device is not waterproof please kept dry.
> The device contains small parts that can pose a choking
hazard.
Technical parameters:
Bluetoot Version:5.0
Charge DC:5 v
Frequency:20Hz-20KHz
Sensitivity:95 db / 1 khz
Plug size:Earphone interface，Charging outlet mini USB
Range Distance:20m
Music time:2-3H
Charge time:1-2H
Accessories
Charge Cable * 1
User Manual * 1
Connect the USB charging cable to the USB port and
the micro USB plug to the deviceCharging port.Red leds
light up when the device is charged.The headset will
Will shut down.When the charge box is full charged,
the red LED light comes on.
CHARAGE INDICATION
Method of use
User Manual
Bluetooth headset
model：I9S PRO
NOTE: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.—Consult the
dealer or an experienced radio/TV technician for help.
Warning:
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.