User's Manual

39285 English I/B ver. 11182A-1
11182A-1
10
OWNER’S MANUAL #
39285
ver.
11182A-1
Page: 10 ENGLISH VERSION
POWER CONNECTION
CAUTION: You must use a Class II,
120 Volt AC / 9 Volt DC adaptor that
delivers at least 350 mA. The center tip
must be positive and the plug must correctly
fit the unit’s DC 9V jack.
1. Plug the AC adaptor into a standard
AC outlet.
2. Insert the small plug into the DC 9V
jack on the rear of the base unit as
shown in Figure 11.
(Figure 11)
HEADSET CONNECTION
One of the special features of your phone is
that your handset could utilize a headset
(not included) for hands-free
communication. Insert the small plug at the
end of your headset cord to the headset jack
at the side of the handset as shown in
Figure 12. Follow the procedures discussed
in “Placing a Call” and “Receiving a Call”
when to place and receive a call.
NOTE: The headset jack of your
Excursion
®
39285 is compatible with
2.5 mm headset plugs only. When you plug
in the headset into the headset jack, it
automatically mutes the microphone and
speaker of the handset. Unplug the headset
to return the handset to normal use.
(Figure 12)
INITIAL SETUP
Please follow these steps before using the
Excursion
®
39285 for the first time.
• Ensure that the handset battery pack is
installed and charged fully for at least
12 hours.
• Ensure that all connections (line cord
and adaptor cord) are properly
inserted into the rear of the base unit.
Setting the TONE/PULSE Switch
• If your home is equipped with tone-
dialing service set the TONE/PULSE
switch to Tone position.
• If you have a Pulse (Rotary) dialing
service, set the TONE/PULSE switch
to Pulse position.
TELEPHONE
OPERATION
Placing a Call
Before you can use your cordless
telephone, you must charge the handset for
12 hours. Failure to do so will require
recharging of the Battery Pack more often.
Placing a Call
Using the Handset
• Press the TALK button on the handset
the In Use LED Indicator will light
up.
• Listen for a dial tone.
• Dial the phone number.
DC 9V Jack
DC
Adaptor
Plug