User's Manual

39285 English I/B ver. 11182A-1

11182A-1

OWNER’S MANUAL #

39285

ver.

11182A-1

Page: 16 ENGLISH VERSION

Received signal

Flutters or fades

• Make sure that the Battery Pack in the handset is fully charge.

• The handset is not too far from the base unit.

No link between

the base and

handset

• You may have taken the handset at a distance away from the base that is

beyond its normal operating range. Refer to the section of “Operating

Range” in the manual for more details.

The unit locks up

and becomes

inoperable

• In the unlikely event that the unit locks up and becomes inoperable, you can

reset the system by momentarily disconnecting and reconnecting the

handset battery pack. Afterwards, return the handset to its cradle on the base

unit to reset the security code before using the unit.

• Should a power outage occur while the handset is away from the base unit,

the handset must be returned to its cradle on the base unit to reset the

security code when power is resumed.

AC ADAPTOR: USE ONLY WITH CLASS 2 POWER SOURCE,

OUTPUT 9VDC, 350 mA.

THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE

PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE

(SERVICING) INSTRUCTIONS IN THE OWNER’S MANUAL.