User's Manual

Cordless Telephone Operation
8
Placing Calls
1. Press the button. “Talk” will display and the Call
Timer starts to count.
2. Wait until you hear a dial tone and then dial the phone
number.
3. When you have finished your call, press the
button again or place the HANDSET on the BASE
UNIT. The duration of the call will be displayed on the
LCD Screen for about 3 seconds.
OR
1. Dial the phone number.
2. Press the button. The number displayed will be
dialed.
3. When you have finished with your call, press the
button again or place the HANDSET on the BASE
UNIT. The duration of the call will be displayed on the
LCD Screen for about 3 seconds.
HANDSET Volume Control
1. To adjust the HANDSET receiver volume level while
having a conversation, press the SCROLL UP
or DOWN button to select the desired setting of
Low, Medium, High or Maximum
2. The default setting is “Low.”
Redial Feature
1. If you get a busy tone, press the button or place
the HANDSET on the BASE UNIT to hang up.
2. Later, press the button again.
3. Listen for a dial tone.
4. Press the /RE/PA button. This will
automatically redial the last telephone number you
called.
5. When you have finished with your call, either press the
button again or place the HANDSET on the
BASE UNIT.
TALK
TALK
TALK
TALK
TALK
TALK
TALK
SAVE
DSST~MAN~ATC.qxd 4/24/2003 5:14 PM Page 15