User's Manual

11
Special Features
Automate Squelch
You FRS is equipped with automatic squelching circuitry, which will
automatically filter out weak transmissions and unwanted noise.
These signals may be picked up as background static, and are usually
cause by terrain conditions or if you have reached the limit of your range.
Monitor button
You can use the Monitor feature to listen in for weak signals in the
current channel. or for adjusting the speaker volume.
* Press the Monitor button for normal monitoring.
* Press and hold the Monitor for at least four seconds for continuous
monitoring.
Your range is dependent on the battery condition of the radio.
The type of terrain where you are located, and the strength of the signal
from the transmitting radio .
Key lock
This feature prevents accidental channel change and other features from
inadvertent changes. Key lock temporarily disables disable on the UP,
DOWN, and MODE key when the lock mode is turn on.
* To turn key lock ON, Press the Lock button until the lock symbol is
appear on the LCD panel.
* To turn lock OFF, Press the Lock button until the lock symbol is
disappear on the LCD panel.
Note: Only the PTT and Call key function during key lock mode.