User's Manual

Setting Up Your FRS Radio

Battery Installation

Batteries are not included with your FRS radio, To use the radio, you

must install 4 AAA size alkaline batteries. Always use high quality

batteries in the unit, to prevent damage from leaking or corrosion.

Caution: incorrect positioning or the batteries can damage both the

batteries and the unlit.

To install batteries:

* Remove the belt clip by pulling the tab on the top of the clip back, and

adding belt clip up and off the unit.

* Pull the battery door.

* Insert four AAA batteries. Position the batteries according to the polarity

markings on the plastic.

* Replace the battery cover.

Battery level / Low battery indication.

* The LCD panel displays the battery power level according to the

number of squares inside the battery symbol.

* When the battery level is low, the battery icon will flash to indicate that

the batteries need to be changed.

Note:

When the batteries are low or need charging,

the BATT LOW indicator in the LCD display icon will blink.

Do not put batteries into fire or expose to high heat. they

may explode.