User's Manual

Thermometer eTE-89B4 User Manual V1.0
14
equipment and the other equipment should be observed to verify that they are
operating normally.
4：Use of accessories, transducers and cables other than those specified or
provided by the manufacturer of this the Model + Name could result in increased
electromagnetic emissions or decreased electromagnetic immunity of this
equipment and result in improper operation
5：Portable RF communications equipment (including peripherals such as antenna
cables and external antennas) should be used no closer than 30 cm (12 inches) to
any part of the Model + Name, including cables specified by the manufacturer.
Otherwise, degradation of the performance of this equipment could result.
Guidance and manufacturer´s declaration – electromagnetic emission –
for all EQUIPMENT AND SYSTEMS
Guidance and manufacturer´s declaration –
electromagnetic emission
The Model + Name is intended for use in the electromagnetic environment specified below. The
customer or the user of Model + Name should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The Model + Name uses RF energy only for its internal
function. There for, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class B
The Model + Name suitable for use in all establishment
s,
including domestic establishments and those directly con
nected to
the public low-voltage power supply network that supplie
s
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
N/A