User's Manual

5
Technical Information
This manual describes the function of the VENDYS-II JK-001Vvascular function
testing device (hereafter referred to as VENDYS-II): performance, operation method
and other safety information content.
Operating the Device
VENDYS-II can be powered by a built-in battery or an AC power supply. The
device is easy to carrywith a built-inhandle.
The device is not a therapeutic device,it is intended for measurement purposes
only.
This equipment is suitable for adults and children over the age of 12 and not
for use onyounger children and infants.
To prevent personal injury or equipment damage, make sure the device is
properly placed on a sturdy surface. Improper placement may result in
equipment damageand/or personal injury.
Do not place or operate the VENDYS-II device in the vicinity ofmagnetic
resonance imaging (MRI) equipment, as the induced currents can result in
severe injuries orburns to thetesting personnel.
Do not place or operate the device in the presence of flammable substances,
flammable anesthetic gases or other open-gas appliances.
Do not place or operate the device in the presence of strong electromagnetic
radiation devices.
To prevent injury, device operation and maintenance is strictly reserved for
qualified technical personnel.
The device may only be used with the original supplied power adapter and
power cord. Do not attempt to operate the device using other power cords or
adapters.
Pay attention to the placement of the power cords, catheters and all other
cables. Keep liquids and other potentially dangerous objects away from the
device in order to prevent personal injury. In the case of liquid spilling and
contacting the device, disconnect the power immediately and contact service
personnel.
To prevent the device from overheating, keep away from all objects that may
obstruct the back ventilation area of the device.
Do not open the instrument shellin order to avoid the possible risk of electric
shock. All instrument maintenance and upgradesare reserved for trained and
authorized service personnel.
Prior to device operation, thoroughly inspect the equipment and its accessories.