User Instructions
Table Of Contents
- 1、Safety Precautions
- 2、Features
- 3、Body temperature and measurement principle
- 4、Product scope/structure composition
- 5、Instructions
- 6.Replacement battery
- 7、Cleaning and maintenance
- 8、Abnormal message
- 9、Product specification
- 10、Fault analysis and troubleshooting
- 11、Calibration mode conversion method
- 12、Warranty commitment
- 13、Electromagnetic compatibility statement
12
11、Calibration mode conversion method
Reference5.5
12、Warranty commitment
1.From the date of purchase, the product can enjoy a one-year free warranty and lifetime
maintenance with the purchase invoice.
2. We will not provide free warranty service for the following failures caused by users.
Such as:
A. Failures caused by unauthorized disassembly, modification or alteration of the
product.
B. Failure caused by accidental fall during use and handling.
C. Failure caused by lack of reasonable maintenance.
D. Failures caused by failure to follow the correct instructions in the instruction
manual.
3. When requesting free warranty service, you must have a warranty card with the date
of purchase and the stamp of the shop where you purchased it. Please be sure to ask the
clerk to stamp the warranty card when purchasing this product.
4. When requesting warranty service, please take this product to the sales shop for
repair.
5. The accuracy of this infrared forehead thermometer has been rigorously tested. It
is generally recommended to check and calibrate the thermometer once a year. Find the
manufacturer or a qualified third-party organization to verify the accuracy of the
product to ensure that the infrared forehead thermometer function is normal and the
measurement is accurate.
6. During the warranty service, if necessary, the product circuit diagram and repairable
component data can be provided to the qualified technical personnel identified by us.
Copyright:
生产许可证号:粤食药监械生产许 20112064 号
Production license number:Guangdong Food and Drug Administration Apparatus Production
License No. 20112064
注册证号/技术要求编号:粤械注准 20162201225
Registration number/technical requirement number:Guangdong Machinery Note 20162201225
生产地址镇沙新路 86 号 6 栋三楼
Production address:
Guangdong Province,Dongguan City,Tangxia
Town,Shaxin Road,No. 86,Building 6,3rd Floor.
注册人住所:广东省东莞市塘厦镇沙新路 86 号 1 栋 301 室、401 室
Registrant's residence:Guangdong Province,Dongguan City,Tangxia Town,Shaxin Road,
No. 86,Room 301,Room 401.
注册人/生产企业:东莞市森普实业有限公司
:广东省东莞市塘厦