User Instructions

14
13、Electromagnetic compatibility statement
Notes：
 TE-79 infrared forehead thermometer accord the relevant requirements of YY0505
standard electromagnetic compatibility;
 Users should install and use according to the electromagnetic compatibility
information provided by the accompanying documents;
 Portable and mobile RF communication equipment may affect the performance of TE-79
infrared forehead thermometer. Avoid strong electromagnetic interference when
using it, such as close to mobile phones, microwave ovens, etc.;
 The guidelines and manufacturer's declaration are detailed in the attachment.
Warning：
 TE-79 infrared forehead thermometer should not be used close to or stacked with
other equipment. If it must be used close or stacked, it should be observed to verify
that it can operate normally under the configuration used;
Annex：
Guidelines and manufacturer's declaration-electromagnetic emissions
The TE-
79 infrared forehead thermometer is expected to be used in the following
electromagnetic environment. The purchaser or user of the TE-
79 infrared forehead
thermometer should ensure that it is used in this electromagnetic environment:
Launch test Compliance Electromagnetic environment-guidelines
Radio frequency
emission
GB 4824
1 group
TE-79 infrared forehead thermometer uses radio
frequency energy only for its internal function.
Therefore, its radio f
requency emission is very
low, and the possibility of causing interference
to nearby electronic equipment is very small
Radio frequency
emission
GB 4824
Type B
TE-
79 infrared forehead thermometer is
suitable for use in all facilities, including
domestic facilities and directly connected to the