User Instructions

5
Warning
Do not disassemble, repair or modify the main body.
•
It may cause errors in the measurement results or cause machine
failure.
The body is not waterproof. Please be careful when using it to prevent
liquid (alcohol, water or hot water) from entering the body.
When the main body gets wet due to exposure to steam, wait until it
dries or wipe it gently with a soft dry cloth.
•
It may cause errors in the measurement results or cause machine
failure.
If there is a temperature difference between the storage location of
the main body and the place where you want to measure, please leave
the main body in the room where you want to measure for more than 30
minutes to allow it to reach room temperature before measuring.
•
Otherwise, the measurement results may be inaccurate.
When the detection lens becomes dirty, wipe it gently with a soft dry
cloth or cotton swab. Do not wipe the detection lens with paper towels
or towels.
•
It may cause the machine to malfunction.
Do not violently bump, drop, step on or vibrate the main body.
•
Damage to the main body may cause injury.
Do not use the main body in places with strong static electricity or
electromagnetic waves.
•
It may cause errors in the measurement results or cause machine
failure.
Do not touch the detection lens with your fingers or exhale into the
lens.
•
May cause inaccurate measurement results
Do not use it in an environment with electromagnetic interference.
•
May cause inaccurate measurement results
Do not try to measure when the body is wet.
•
May cause inaccurate measurement results
Statement
Mandatory
Prohibition
Disassembly
prohibited