Wiring Diagram

Piug & Play
Haisen Technology | 02
Shenzhen Haisen Technology Co., Ltd., Tel: [phone] 丨Fax: [phone]丨Email: [e-mail] 丨www.haisensz.com
Light off when ambient
lux level is higher than
preset lux amount.
Light automatically on
when ambient
brightness is lower
than preset lux level.
With insufficient
ambient brightness,
light dims to 100%
when motion
detected .
Light dims to
standby level if no
motion detected after
holdtime.
Application____Daylight priority
Daylight Priority
+
Base
Sensor Module
Empty Cover
Motion sensor
Motion sensor
No sensor
No sensor
+
The bottom part will be always on the lighting fixtures; if the function is needed, the
module will be placed inside; if no function needed, the module will be removed. It
doesn't hurt the looking of the whole pack.
Icon
No icon
The cover with humanoid icon indicates
there is built-in microwave module with
sensor function; The cover without
humanoid icon indicates there is no
built-in module as well as sensor
function.
Natural light
Lux off
Lux on
light on automatically
light off automatically
Precondition of Daylight priority:
1. Standby period is +∞;
2. Standby dimming level is on 10%, 20% or 30%;
3. Daylight threshold is on 30Lux, 50Lux, 80Lux or 120Lux.
With Daylight priority function, HD06VCRH 3 is able to differentiate artificial light
brightness from natural light after installed inside the fixture, and automatically turn
off light when ambient brightness exceeds preset lux level.
Dusk/Dawn sensor:
Dual-PD technology brings a fully automatic dusk/dawn sensor which can tell the difference between
natural light and LED light, to ensure the light will be off when needed.