User's Manual

4
C. About the rechargeable Battery & Charging
a. Regarding the rechargeable lithium battery:
1. This Speaker has an internal, non–user-replaceable battery. For best
results, the first time you use this Speaker, let it charge for about 4 - 6
hours or until the “Battery Indicators (5)” all LEDs remain solid from
blinking which show you the battery is fully charged.
2. For maintain the battery life and performance, if Speaker isn’t used
for a while, the battery might need to be recharged. Charge the
battery at least once every month.
b. To recharge the Speaker’s internal battery:
1. The Speaker can be charged by connecting the included USB cable to
USB power adapter /USB wall socket or any other USB power source.
2. It can also be charged by connecting the included USB cable to a
powered ON computer’s USB port (recommended use USB 3.0 port to
maintain the charge efficiency)
3. However, make sure that the power source can provides DC 5V and at
least 1A/1000mA to maintain the charge efficiency.
4. Open the “Silicon Cover (1)”, connect the Speaker’s “USB Micro
Socket (7)”, via the included USB cable, to a USB power source or USB
port on your computer;
5. Each LED flashes and remains solid as its corresponding capacity has
been reached;
- If the LED 1 blinking < 25%;
- If the LED 2 blinking < 50%;
- If the LED 3 < 75%;
Item Control
1 Silicon Cover (for protect I/O port)
2 Silicon Hanger (for lanyard)
3 Speaker
4 Bass Radiator
5 Battery Indicators (LED x 4 for charge status or battery level)
6 AUX Input (Under Silicon Cover)
7 USB Micro Socket (Under Silicon Cover)
8 USB Type-A Socket (Under Silicon Cover)
9 Button (
Power on and off
)
10 Button (Volume, Previous Song)
11 MIC Hole (For Hand-free)
12 Button (Volume, Next Song)
13 Mode Indicator (blue for wireless, red for AUX)
14 Toggle Button (for Power Bank Control)
15 Reset Hole (Built-in tact switch)
16 / Button (Play/Pause, Pick up call,