User's Manual

6
Bluetooth devices, you may need to input “0000” as pairing
password)
3. If pairing is successful, a beep sound will heard and the “Mode
Indicator (13)” will slow blinking each 4 ~ 5 seconds once.
4. Now, you can start to music play from the mobile device by it music
player program.
c. Power Off:
1. Press and hold the “ (9)” button again to turn off the Speaker when
it is not in use.
2. A series of tones will sound from speaker and the Speaker will turn
off.
Note: For saving battery energy, the Speaker will turn to off mode
automatically when no mobile device is in paired in 8 minutes.
d. Disconnect from paired device:
1. To disconnect with paired device, for better result turn Off the
Speaker directly by press and hold the “ (9)” button. Or;
2. You can choose “Disconnect” from Bluetooth paired device list or
turn “Off” the Bluetooth function on your mobile device.
3. In this case; the Speaker will switch back to “Searching / Pairing”
mode automatically itself, a series of tones will sound and the “Mode
Indicator (13)” will rapidly flash blue again from slow blinking.
4. Now, you can process for new mobile device pair or power Off the
Speaker as you wanted. (refer to item E.b.1 ~ b.3 methods mentioned
above)
e. Auto re-connect with paired device and New pairing:
1. Every time you turn on the power of Speaker; it will firstly searching
for the mobile device, which has paired previously and still in record;
2. The Speaker will re-connect this mobile device as priority if it is in
searching/pairing device mode and connection range.
3. If not found in some seconds, the Speaker then will turn into new
pairing mode automatically.
4. Now you can process for new mobile device pair in this case. (refer to
item E.b.1 ~ b.3 methods mentioned above)
f. Switch to new pairing from connected mode:
1. In connected mode, you can switch the Speaker into
searching/pairing mode for paring with the new mobile device at any
time you desired;
2. Press and hold the “ / (16)” button until a series of tones sound,
the “Mode Indicator (13)” will switch to rapidly flash blue from
connected mode.
3. Now you can process for new mobile device pair. (refer to item E.b.1 ~
b.3 methods mentioned above)