User's Manual

7
g. Wireless Music Playing Control Function: (on Speaker)
1. In playing music, press “ / (16)” button to pause the music. To
resume the music press it again.
2. Press and hold the “ 12)” button to increases the volume level.
3. Press and hold the “ (10)” button to decreases the volume level.
4. When maximum or minimum volume is reached, a tone will sound.
5. Press once the “ (12)” button to go to next music.
6. Press once the “ (10)” button to go to previous music.
h. Hand-Free Function
1. When there is an incoming call during wireless music playing mode;
2. The ringing will sound and the playing music will pause automatically.
3. Press the “ / (16)” button to pick up the call if you want.
4. Now you have hand free function with the Speaker.
5. Press the “ / (16)” button again to hang up the call when finished.
And the paused music will resume playing automatically.
6. Press twice the “ / (16)” button for 3 seconds to ignore the
incoming call.
Tip: speak to the “MIC (11)” hole direct with distance in 30 ~ 60cm to get
the best speakerphone performance when necessary.
i. Redial For Last Call Function
1. To redial for last called number by the Speaker, even it is in music
playing mode.
2. Press twice the “ / (16)” button to enter into redial function, the
playing will pause and switch to hand free function for redial.
3. Press the “ / (16)” button again to hang up the redial call.
4. Make sure that your mobile phone has have last dial call used, if not,
the redial for last call function cannot be activated.
j. Low Power Reminder And Power Off
1. The device will send tones sound from speaker by every minute.
When you heard this reminder sound, please connect the Speaker
with USB power source for charge if you still want to use the Speaker.
2. If not, the Speaker will turn off automatically in case the battery is
keeping low energy level in some minutes.
3. In this case, the Speaker cannot be turned on, until you recharging
the battery at least 10 ~ 15 minutes, because the rechargeable
battery has not enough energy.
4. Press and hold the “ (9)” button to turn on the Speaker after
charged with enough energy if you want.
F. Use AUX IN Function
1. In power ON mode, open the “Silicon Cover (1)”, and connect the
Speaker’s “AUX IN Jack (6)” with an external device’s “Earphone /
AUX / LINE” Output through the Audio Cable (Provided).