User's Manual

8
2. The Speaker will switch to “AUX In” mode automatically from wireless,
and the “Mode Indicator (13)” will switch to red from blinking blue.
3. Now the AUX In function is ready, start to music play from your
external device by it control and or program, for example, Play, Stop,
volume control…etc.
4. You also can use Speaker control;
5. Press and hold the “ (12)” button to increases the volume.
6. Press and hold the “ (10)” button to decreases the volume.
7. When maximum or minimum volume is reached, a beep sound will
heard.
8. Disconnect the Audio cable when it is done.
G. Reset the Speaker
In some circumstances the Speaker’s function may hanging and need
to reset. To do this;
1. Use a 1mm stick or similar object (like tooth stick), genitally insert it
into the “Reset Hole (15)” until you feel hit the surface of the tact
switch;
2. Then, add a bit of force and you will get a click sound and feeling
return from switch.
3. The Speaker is reset. And then, press and hold the “ (9)” button to
turn on and restart.
Important: Do not reset the Speaker if it is proper working.
H. Trouble Shooting
Can’t turn on • Check battery is it charged with enough energy.
• Check whether the Speaker is turned on.
No sound
• Check whether volume level is in lower position
on Speaker and your mobile phone or PC/Mac.
• Make sure that your mobile device is within the
effective operation range.
• Check whether the mobile device is paired and
connected.
• Check if you have selected the correct audio
source.
Speaker no response • Restart by reset function.
Some digital
products can't be
charged
• The cable is not properly or firmly connected.
• The Speaker’s internal battery energy emptied.
• The charging voltage of device must be DC 5V.
• The charged device is not compatible; the
charging current may too much, the Speaker
performs over-current protection. Disconnect
and check you external device.